Biggest size intercooler for J-Blood front bar

[loarm]

Hi there all, just wondering what is the biggest size intercooler you can use without chopping anything off the J-Blood front bar?

Thanks

Peter

[rthy]

got a pic of your car?

[loarm]

Nah I don't have a pic of my car. I'm just planning ahead because once my engine conversion is gonna go ahead I wanna get the front mount done as well and later on when I get more dosh I wanna get it kitted up but just making sure if I gotta the chop the front bar or not with lets say a 600x300 intercooler.

[.wolfwood]

get a 400 x 300, the 600 is a little to big and willl have trouble mounting and fitting it.

[.wolfwood]

get a 400 x 300, the 600 is a little to big and willl have trouble mounting and fitting it. it will be hard to do the plumming with out going underneath the car then will be low, this is jsut from what i have seen

[loarm]

Just in case it makes any difference i'm dropping a CA18DET in http://www.ae86drivingclub.com.au/forums/emoticons/happy.gif

[otomoto]

My 600x300 fits fine, although I will admit it is farken huge.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/100326.jpg

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/100327.jpg

It's not a J-Blood bar, but it shouldn't matter too much as long as you mount the cooler back as far as you can.

[loarm]

Is it me or is your cooler on a slight angle at the bottom?

[otomoto]

Is it me or is your cooler on a slight angle at the bottom?[/b]

Where exactly do you mean? It might be. I haven't really noticed.

[loarm]

Hahaha that just came out of no where don't mind me.

[.wolfwood]

i want one of those little overflow bottels that you have, they look nice

[upgarage]

i use exactly what otomoto uses except my core is only 270 high

i also mounted it in such a way that the shroud that goes from the bumper to the lower rad support can still be used

heres a few pics:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/100360.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/100361.jpg