PDA

View Full Version : Big Brake Master Cylinder


Jason
1st May 2006, 06:44 PM
I'm in need of what fits the normal brake booster, in terms of a bigger master cylinder for my brakes. I'm running hilux 4 pots on the front and T18 drums on the back, I was on the hunt for a starion but they are quite hard to come by. What else fits the brake booster? Ive herd rumors that patrol ones fit? What model? What else can I use that would be adequate
Gilly
1st May 2006, 06:55 PM
pm OMY he used a patrol one on his s13 brake set up.
Mad RS
1st May 2006, 07:36 PM
I believe it is any Nissan 4x4 after 1988 with a 2 bolt master cylinder fits.
omy
2nd May 2006, 12:07 AM
Yes a Nissan 4x4 or 2wd just make sure its the two bolt one. Just have to bend the lines a little to fit.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/101558.jpg
Hen is a total nutcase
2nd May 2006, 12:39 AM
R32 GTS-t non-ABS. Piss off the splitter block and all lines will fit (driver's front only just).

Or I re-drilled a 15/16 Corona master in a drill press at home. Has worked without fault for over 2 years.

Hen
PLACEBO
2nd May 2006, 12:54 AM
Did it feel much better
omy
2nd May 2006, 02:51 AM
Instead of pushing the brake pedal to the floor with the standard master, the 15/16 will give a firmer pedal with less travel.
Jason
2nd May 2006, 07:29 AM
cool thanks http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif
gottago
2nd May 2006, 10:36 AM
s13,s14,s15,r32,z32 all fit with just changing the lines heaps better as well
Jason
19th August 2006, 10:43 AM
Just pulling this back out from the deep, ive found a couple of boosters, but they are from ABS vehicle (S13,14 ect) from what i can tell they are the same it should matter should it?
Gilly
19th August 2006, 04:10 PM
they'll work. just need to get some lines made or get some lines from the wreckers and try to bend to suit. or get some made.
psychofox
19th August 2006, 10:49 PM
I use a Nissan Navara 15/16" master with FC RX7 calipers and it gives good pedal feel. They are really easy to find at pick a part wreckers. I ust got some new brake lines made up at a brake shop.
Jason
19th August 2006, 10:51 PM
yeah im getting new ones made up since mine are all rusted and scary http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

my master should be here soon http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif