20v tps wiring

[japlish]

Can any one tell me what wires are for what on a 20v tps.

[Hen is a total nutcase]

At a guess I'd say:
- +5V supply (common to other sensors, like AFM, trace it out)
- Ground (brown)
- Signal (0-5V) depending on throttle position (check resistance bewteen pins with a multimeter as you move the throttle to find this one)
- Idle (gets 5V only when throttle fully closed) (again check with a multimeter)

However surely the wiring diagrams floating around the net have all this info on them.

Hen

[japlish]

Anyone else. I've had a look on the net and haven't come up with any thing yet.

[selk]

u tried club4ag

[SprinterTRD]

Simple
pin1 +5V ( I think blue wire)
pin2 TP signal
pin3 Idle switch signal
pin4 ground ........brown wire

The pin numbers are on the wire end of the connector

[japlish]

Simple
pin1 +5V ( I think blue wire)
pin2 TP signal
pin3 Idle switch signal
pin4 ground ........brown wire

The pin numbers are on the wire end of the connector[/b]

Wick