flywheel of ae82 front wheel drive 4age any good to use on rwd convertion

[reg450]

i got the 4age with the flywheel its outer ay ae82 can i use this flywheel for the rwd convertion

[jjoeworks]

Yes. This will be the 8 bolt flywheel you will need. Just remember the get a spiggott bearing to go into the back of the crank to suppodt the input shaft of the gearbox.

cheers

Todd

[reg450]

my motor came with clutch and flywheel all attached does thins mean i have the spiggot bearing

[flamingheads]

I assume the spiggot bearing is the throwout bearing, which is on the gearbox side of the clutch so you won't have it and you'll have to get one. I'm pretty sure they're only about $15ish.

[jjoeworks]

A spiggot bearing is different to a throwout bearing. The input shaft of the gearbox is supported by the spiggott bearing. It goes into the end of the crank and is only on RWD cars. No spiggott - front bearing failure on your gearbox. Auto parts store for around $10. Use a ADM sprinter one as it is the same.

Cheers

todd

[reg450]

I assume the spiggot bearing is the throwout bearing, which is on the gearbox side of the clutch so you won't have it and you'll have to get one. I'm pretty sure they're only about $15ish.[/b]

the bearing your talking about is a thrust bearing