AE86 Water Supply For Turbo

[44GTE]

Hi

Was wondering where people have sorced there water in / out for the turbo on a 4AGTE.

I currently have water from the Water drain on the block and was wondering where to get the other connection to, either heater hoses / radiator etc.

Please and ideas appreciated and pics would be great also

Thanks

[slide86]

i would use one T'eed into the heater hose for the feed, that way it doesnt run all the way round the engine, just to the back.

[44GTE]

slide86

Have you got any pictures of where exactly you connected into ?

[slide86]

nah', but i did it recently on a r32 with bigger turbo. i just went down to bunnings and found a brass T piece.

then i cut the heater hose and fitted the T in. adding a line with a banjo fitting on the end to bolt to the turbo was the last step.

it worked well and the car is still going.

[.wolfwood]

here is who mine is done, the line then just runs around the back of the block, she's all good



[attachment=5283:attachment]