Wiring in 20v! Diff situation :)

[AE93-TWINCAM]

Hey,
Just got my 20v today,
I'm lookin at the wiring loom, being a conversion kit the loom has been cut from the back of the motor,

Is there any advice about undertaking the job with this situation?

I heard the best thing to do is to lay the 2 looms next to each other and start following where they go smile.gif

Any advice on this topic would be great,
The main idea was to try use the ae92 loom as much as possible

Thanks
Adrian

I got a ae93 sx hehe

[rthy]

what ecu do u plan to use?
if your ganna use the stock ecu you might have to look around for the stock 20v wire daigram - should be on club4ag

[Monk]

Not to sure what your asking..
but on a 20v loom every plug is different so you can not put the wrong plug into the wrogn socket so to speak.

if thats what your asking.

[selk]

go to the tech section on rollamods.com & articles section in 4age.net.... they might help

[rthy]

the guys are right, just sell off all your old 4age bits and use all the original 20V gear in there