4age small port to big port 4agze

[Orange hachi]

hey. i have question about swappin all accessories stuff from small port to big port
like i mean throttle position sensor, crank angle sensor
i have a microtech mtx8,4agze and small port crank angle sensor
so can u swap crank angle sensor from small port and put it on a big port engine??
i dun really wanna rewire the car thats y

[Orange hachi]

and also can u swap a throttle position sensor from small port to big port engine??

[Big T]

Bigport and smallport TPS are NOT interchangeable. They are 90 degrees out from each other. You can swap the whole throttle body over no problems though.

The smallport 4age doesnt come with a CAS but the electrical internals of the dissy is identical to the GZE CAS. This means you can cut the rotor button off and make a cap for it and you'll have a CAS.

Eddie.

[Orange hachi]

Bigport and smallport TPS are NOT interchangeable. They are 90 degrees out from each other. You can swap the whole throttle body over no problems though.

The smallport 4age doesnt come with a CAS but the electrical internals of the dissy is identical to the GZE CAS. This means you can cut the rotor button off and make a cap for it and you'll have a CAS.

Eddie.[/b]
thanks alot for that
so i will just have to swap my engine and intake manifold
leave the small port throttle body and cas and just mount them all on a big port engine rite?
coz im swappin a small port to big port motor

[pumpkinking]

what are you doing with your small port engine? wanna sell it?

[Orange hachi]

heheh nah im swappin with a friend of mine
so i will need to give it to him