want to no if possible

[reg450]

ok i can get the parts bloody cheap i was thinkning this might be a good idea for low on budget guys 4a-fc head 16valve head the carby version bolt up to 4ac bottem end parts needed correct me if rong

head

setting up the cooling system

carby

manifoldds

timing belt kit

change the exhaust on other side

vrs kit for 4afc

WILL THIS SETUP WORK considering im getting all this very very cheap work at autoshop plus me doing the labour

[Course_Out]

I don't see why it wouldn't, I would check what sort of compression you are going to end up with when you change heads, I know if you put a ge head on a 4ac block you end up with 6.0:1 compression. Check the parts books at your work to see if the pistons are the same, if they are i think you should be on a decetn thing, but I think you wil only pick up about 20hp?

I think the dizzy comes out the back of the head as well?

[reg450]

course out ur right the dizzie sis at the back this is a idea down the toilet lmao 20hp is fuk all not worth it
thanks btw

[Course_Out]

No worries dude http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif