ONI86
20th November 2006, 08:04 PM
ok i was driving up a main road in my area lat week, i decided 2 giv it a bit of a boot, i felt a hesitation and sumfin similar to a missfire java script:emoticon(':fap:', 'smid_12')
http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif, since then the car seems to be hunting between 1,500rpm and 2,000rpm.
i inspected the dizzy cap and found that the points were badly worn and the center point was almost gone!
the rotor button is melted in the center area and badly worn.
i removed the dizzy to see if it would interchange with the 1 on my AE82's 4age but since the 82's dizzy woodnt come off i decided 2 abandon this. i put the 86 bak 2 its timing marks and reinstalled the dizzy. after much f**king around it was all bak 2 normal... i starterd the car and supprisingly the car idles fine, no hunting, reving a little too high, (lowered by turning dizzy assembly) when i rev the car it sucks in air but does not seem to rev any harder. the boys at work tell me its a air mass sensor or a MAP sensor that fuked.
what do u guys think? i need a new dizzy cap and a rotor button either way but could an air sensor b fukt?
and not 2 sound like a coplete n00b but duz my 4age hav a MAP or air mass sensor?
pics below.....
http://www.ae86drivingclub.com.au/forums/emoticons/fap.gif, since then the car seems to be hunting between 1,500rpm and 2,000rpm.
i inspected the dizzy cap and found that the points were badly worn and the center point was almost gone!
the rotor button is melted in the center area and badly worn.
i removed the dizzy to see if it would interchange with the 1 on my AE82's 4age but since the 82's dizzy woodnt come off i decided 2 abandon this. i put the 86 bak 2 its timing marks and reinstalled the dizzy. after much f**king around it was all bak 2 normal... i starterd the car and supprisingly the car idles fine, no hunting, reving a little too high, (lowered by turning dizzy assembly) when i rev the car it sucks in air but does not seem to rev any harder. the boys at work tell me its a air mass sensor or a MAP sensor that fuked.
what do u guys think? i need a new dizzy cap and a rotor button either way but could an air sensor b fukt?
and not 2 sound like a coplete n00b but duz my 4age hav a MAP or air mass sensor?
pics below.....