4AZGE AE101 Valve Stem Seals Part No ?

[44GTE]

Hi

Has anybody got the valve stem seal part no to suit an AE101 4AGZE Map type small port engine.

If so how much also and has anybody changed these before without removing the head with sucess.

Cheers

[mattysshop]

there the same as all other 16V 4ages..

you need to have compression in the cylinder to keep the valves closed when you take the springs and retainers out.. sounds dodgey, but if you keep the plugs in there you might be able to fuck around with rooling the car in gear onto compression of the desired piston.. seriously though take the head off..

[mattysshop]

either that or if you have the tools to perform a leak down test.. or make your own out of a hollowed out spark plug, with a air line fitting on one end?? fill each one with compressed air, this should hold the valves up whilst changing the stem seals..