will this clutch fit

[aeke7086]

just got a question.. will a 200mm exedy clutch, exedy pressure plate and stock flywheel, fit a 20v?????
it was run behind a 4age 16v with t50????

cheers

[dr1ft-pig]

should fit flywheels are the same im pretty sure... if not use 16v flywheel

[Dish]

Flywheel on the 20v are a bit bigger I'm pretty sure, only like 20mm I think, but I have a tendency to be wrong with sizing. 20v flywheels are a bit lighter and more grip surface for your clutch.

[poh_86]

so could you use the 200mm clutch to fit a 20v with 20v flywheel?

[Hen is a total nutcase]

stock 20V flywheel = 212mm

Do not use a 200mm clutch with this flywheel. However if you have a 200mm flywheel and clutch you can just bolt these to your 20V and everything will work fine.

All (8 bolt) 4A flywheels are interchangeable.

Hen

[poh_86]

how ever its adviseable to stick with the 20valve flywheel right? going of the previous posts

[AmyC]

20v flywheel is bigger and has more gripping area so in theory it's better.

16v = 200mm
20v = 212mm (215mm according to repco)
GZE = 224mm but will not fit inside the bellhousing of a T50.

[mattysshop]

most smallports are also 212mm..

7afe is 212mm
4afe is 200mm but both fe types are 6 bolt..

so a stock pbr clutch would be similar from a 7afe, to a ae92 4age..

[aeke7086]

Yep 7afe is the same as 4age smallport.
cheers