PDA

View Full Version : FS: 4AGE Jdm Rwd Bluetop, tailshaft, engine bits, stuff....



20sil
16th March 2007, 10:08 PM
For sale:
1. 4AGE JDM RWD Bluetop, is running, has got rebuilt injectors and a rebuilt starter motor, new spark plugs, new oils and a flush, comes with everything except for exhaust manifold.
2. SOLD
3. Brand new radiator, just been put on, suit 70 or 71.
4. Custom one peice tailshaft, big joints on them, about 3.5 inches thick and 10x lighter than stock, suit 4age conversion into 70 or 71.
5. Custom made loom to suit 4age conversion into 70 or 71, comes with 4age ecu, can make it into engine package.
6. Vl turbo fuel pump setup to run 4age, comes with lines and filter, in cabin mounted.
7. Old school Soarer rims, everyone knows them as MA61 rims, these have been polished and painted, set of 4, no tyres, only one rim has gutter rash, rest are immaculate, 15x6, wont find many this good and in this size, very rare.
8. Half cage to suit 70 or 71, was out of ex corrola rally car, cams approved sticker on it, need plates welded on to it but ill get that done, is all aliminium so is very light. SOLD PENDING PAYMENT.

9. 70 conversion bits to 4age, this is pedal box, engine x member, gearbox x member, master cylinder and lines with clutch hose, may seperate.
10. 70 shell, is all stripped from driver and passenger seat back, all panels are straight, has rust (duh), good for project car thats what i was doing with it.

Condition:
1. Pretty good, doesnt blow smoke, revs like a normal 4age, has that lumpy idle which is imfamous with 4age's.
2. SOLD
3. Brand new.
4. Awesome condition, not brand spankin new but not far off it, these cost about $500 to make in this size and weight.
5. Good condition, made by Ant at Kaizen so professional work has been achieved, missing some circlips.
6. Good condition, not brand new but works a treat, all the lines are new and so is filter.
7. Awesome condition for there age, polished and painted.
8. Looks shabby but still intact.
9. Most of its old obviously but they do they job, clutch hose is brand new.
10. Rust, stripped, good for parts probably.

Price and price conditions:
1. $1500
2. SOLD
3. $220.
4. $350, this thing is awesome.
5. $400 with ecu.
6. $120
7. $400
8. $350
9. $220
10. Offers.

Extra Info: Some stuff i am nego on. Pics will be up after i post this. Is that how you spell condition?

Contact Details: Just reply here or pm me.

Location:
Gold Coast.

Delivery & Conditions of Delivery: Only smaller stuff i will ship, buyer pays costs.

20sil
16th March 2007, 10:15 PM
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/126504.jpg (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/126502.jpg (http://imageshack.us)
http://img144.imageshack.us/img144/9900/fuelpump007pm6.jpg (http://imageshack.us)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/128811.jpg (http://imageshack.us)
http://img227.imageshack.us/img227/6341/fuelpump016ea0.jpg (http://imageshack.us)
http://img111.imageshack.us/img111/926/fuelpump014jj7.jpg (http://imageshack.us)
http://img111.imageshack.us/img111/6052/fuelpump013qw6.jpg (http://imageshack.us)

spillman
16th March 2007, 11:55 PM
pm'd

jjoeworks
17th March 2007, 12:07 AM
Pm'd also

20sil
17th March 2007, 08:47 AM
Pics of cage and engine up. Note cage is only resting there, so may not be in best position, but that position works.

20sil
17th March 2007, 06:25 PM
Here is my number for anyone wanting to call me regarding anything.

0421479070 - Shaun.

roadsailing
17th March 2007, 07:02 PM
two things:

1. soarer rims are not known as MA61 rims, MA61 rims are 14 by 7 inch, soarer rims are 15 by 6 as you have pointed out, two totally different things!

2. what is that radiator out of?

20sil
18th March 2007, 09:59 AM
Oh ok thanks for the clear up.

That radiator is a brand new ke70 one, keen on it?

Gilly
18th March 2007, 11:01 AM
Oh ok thanks for the clear up.

That radiator is a brand new ke70 one, keen on it?[/b]

brand new KE70 one that has had its bottom hose fitting relocated to the drivers side to suit 4AGE bottom hose

http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif

thats a selling point, don't leave it out http://www.ae86drivingclub.com.au/forums/emoticons/laugh.gif

20sil
18th March 2007, 12:49 PM
Thats right Gilly....Gilly says its cool!! So someone buy it.

v-tec
18th March 2007, 12:51 PM
mine came with the radiator bottom hose drivers side... i must be special

Gilly
18th March 2007, 01:11 PM
mine came with the radiator bottom hose drivers side... i must be special[/b]

yours would've been an AE71 item Grant, so using the 4ac originally it would've been on this side http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

this is a ke70 one that has had the outlet swapped around

therefore = custom = sik

in saying that he could've just bought a AE71 radiator and save himself a couple of bucks by not having to swap them over.

20sil
18th March 2007, 03:50 PM
They didnt charge me to do it and the AE71 wasnt available atm of purchase.

20sil
18th March 2007, 06:54 PM
I need the engine and gearbox gone!! Surely theres gotta be someone interested, this is 86 forum.

Cj_sullivan
19th March 2007, 02:12 PM
do u still have the TRD exhaust manifold if u do illtake it , how much to melb 3021 , have cash i want / need it

20sil
19th March 2007, 03:38 PM
May have someone interested in all the engine stuff so ill get back to you.

20sil
19th March 2007, 09:05 PM
Bump to the top, just incase.

20sil
21st March 2007, 04:45 PM
Bump. People who wanted the stuff please pm me if you want it!! Dont pm me saying you want it then not reply back!!

Cage sold pending payment.

DRFT - 86
22nd March 2007, 07:31 PM
pm me if you would sell the RWD starter on its own.. cheers

Niz..

20sil
23rd March 2007, 07:03 PM
Sorry man want to sell with engine.....

Really want this engine gone so i can get rid of the car, the engine can be seen running but you better hurry as people want the manifold!!

Brendo
24th March 2007, 10:04 AM
is the tailshaft to suit a t18 diff or just standard

20sil
24th March 2007, 02:30 PM
Just standard borg warner, but the ends can be changed.

egg_83
25th March 2007, 09:08 AM
do you have flywheel? need one

20sil
25th March 2007, 01:32 PM
Only on the engine, not willing to seperate.

20sil
28th March 2007, 05:15 PM
Willing to let engine, box, loom and ecu go for $1500. I need this shit gone asap, throw me some offers if you think there shit prices!!

20sil
28th March 2007, 08:56 PM
Exhaust manifold sold!!

20sil
29th March 2007, 06:41 PM
Price drop on tailshaft, now $350!!

20sil
30th March 2007, 08:54 PM
C'mon, sif no one wants an engine and stuff....

20sil
4th April 2007, 07:38 PM
Price drop on Half Cage $250!!

JDM-086
19th April 2007, 04:15 AM
this engine still for sale?

20sil
21st April 2007, 06:00 AM
Sorry mate, everything is sold except for rims!!

magee_71
18th August 2007, 02:09 PM
hey mate will u take $350 for the rims......give us a call if there still available on 0414073140

clint

Madgarbage
18th August 2007, 02:31 PM
hey mate interested in rims, will pay 400 plus shipping to 4070 if ther still available

73ta22
19th August 2007, 06:38 PM
hey man ill take the front guards, headlights, bonnet, grille, and bumpers. if you still got them.
if they're the flat nose shape..

cheers. richie..