PDA

View Full Version : QLD 14x6 +12 260Z Wheels



puzzigully
26th March 2007, 12:15 PM
For sale: A set of 5 genuine nissan 260z 6 spoke wheels with tyres, centre caps and wheel nuts

http://img267.imageshack.us/img267/1900/dsc01117wc0.jpg (http://imageshack.us)

Condition: pretty good considering they would be at least 20 years old

Price and price conditions: $350

Extra Info: these are a good size for a sprinter, and have a pretty nice offset and a couple cms of dish. I put tyres on them 3 months ago, 2 were brand new and are at 90% tread now, 2 were as new ones and are a bit chooped up and id put them at 40% tread (just above markers) the 5th one matches one of the back ones, but some little turd let all the air out and I drove a few metres on it without realising and split the sidewall, so I put the spare on. I have a r31 steelie somewhere that had a good tyre on it so whoever buys the rims will get the tyre too if they want it

The clearcoat on the spare is a little worse off than the others, and the whole set could do with a polish.

http://img259.imageshack.us/img259/8058/1003656xg8.jpg (http://imageshack.us)

Ive also got the matching Z centre caps with are in VGC
http://img81.imageshack.us/img81/2451/1003662pv8.jpg (http://imageshack.us)

These wheels have deep recessed wheel nut holes, which you need long reaching nuts to use properly. I have a full set of these nuts but they are nissan 1.25 thread pitch. on a toyota this would be fixed by using spacers with nissan thread pitch studs or getting another set of 1.5 pitch wheel nuts. if youve already got this style of wheel nuts your home free.

Heres a pic of the holes, and the difference between a normal wheel nut and the ones for the wheels
http://img367.imageshack.us/img367/3936/1003660hx0.jpg (http://imageshack.us)
http://img145.imageshack.us/img145/3106/1003661fb4.jpg (http://imageshack.us)

id recommend test fitting them first, but I have seen pics of them on a KE70 and a AE86 so they should fit
Contact Details:
PM me, or send me a text/give me a call 0402728256

Location:
Mt ommaney in brisbane

Delivery & Conditions of Delivery: pick up, if your interstate and you want em you can arrange a courier

puzzigully
28th March 2007, 12:40 AM
everyone loves the old school.. well these are even older and even schooler!

heres a pic of the same wheels fitted to a KE70.. not my car

http://img182.imageshack.us/img182/8323/fosalegd0.jpg

egg_83
28th March 2007, 01:23 AM
how wide are these rims?

puzzigully
28th March 2007, 01:38 PM
says in the title man.. 6 inches of rock hard fury

Mr Freeky
28th March 2007, 09:23 PM
99% shore that they will fit cause my mate has a 280Z and his mags fit perfectly on my AE86

puzzigully
29th March 2007, 11:54 PM
your mum likes the bump

roadsailing
30th March 2007, 12:25 AM
just to help you out a bit here, if these are the same wheels as i currently have on my sprinter:

they will fit a AE86 PERFECTLY using standard wheel nuts, i have run mine for about 2 years with zero problems, width is better than the shitty 13s and the tyres dont rub much on anything.

i'd sell mine too, but i'm hanging on to them for drift rims.

can you take a photo of the offset? mine are definately +10, it would be wierd if they made them with a 2mm difference.

puzzigully
30th March 2007, 12:48 AM
I havent measured them, thats what I was told when I bought them and compared to stock wheels they sit further out. You can use normal wheel nuts, its just that I could only get them on about 2 or 3 turns because my studs wernt long enough. this is an r31 btw

so yeah, +10 give or take a few mm. very nice lookin wheels for the money, could say these look like longchamps. and theyve got dish on em too..

I need coin..

puzzigully
31st March 2007, 11:30 AM
price drop 300 cash

I NEED THE GREEEEEEENS MAN

AND BY GREENS I MEAN MONEY

MountainRunner
31st March 2007, 12:44 PM
there JDM to notice the JWL stamp GL with sale yo

puzzigully
5th April 2007, 12:59 AM
bump

breno
5th April 2007, 11:20 AM
lol my old car!

These are auctually pretty cool rims!
And yes you dont have to use a shank wheelnut stock tapperd ones work fine.

puzzigully
7th April 2007, 11:24 PM
do a skid

driftke70
8th April 2007, 02:50 PM
they are actually very nice wheels. When i read it i thought pity about 15's then noticed they were 14's. Would be a great set of street wheels for the keto.

puzzigully
8th April 2007, 08:05 PM
had a guy interested but for some reason he stopped replying to PMs

bump need the cash!

hilton
8th April 2007, 08:11 PM
they so dont look liek 14's

Gilly
8th April 2007, 09:48 PM
^^ they are 14's i own a set

steroidchickens
8th April 2007, 10:27 PM
not that anyone cares, but these come standard on datsun 280zx. and they fit on ae86 and ke70 fine.

Gilly
8th April 2007, 11:04 PM
dude i'll get a pic up tomorrow of these on a KE70 like all 4

they are sweet

puzzigully
9th April 2007, 01:53 AM
thanks man

heres a pic of em on my derty wan
http://img257.imageshack.us/img257/2783/dsc011742ge3.jpg (http://imageshack.us)

they have a the same offset situation as the 86s

puzzigully
10th April 2007, 10:47 PM
someone put these on a ke70 they look shithot!

puzzigully
13th April 2007, 01:28 AM
these bad boys are sold!

Gilly
13th April 2007, 08:51 AM
cool as

closed