PDA

View Full Version : T-series Diff


ASC
6th April 2007, 03:08 PM
For sale: T-series drum brake diff

I have a complete T-series drum brake diff out of my T-18 for sale.

This diff has recently had new axle bearings installed along with a mini spool locker (approx 8,000km's ago).
This is not a dodgy backyard weld up job, the mini spool was installed professionally by precission diff & gearbox in Adelaide.

The center ratio is 3.7:1, & the diff was powered by a 4agze.

It comes with everything needed to bolt into your AE86 sprinter
(hand brake cables & rear half of T-18 tail shaft).

Price: Offers around 700 will be considered

Location: Adelaide Westerly suburbs, pickup prefered.

Contact: Pm or drop a line

Pics:
[attachment=13996:attachment]
[attachment=13997:attachment]
[attachment=13998:attachment]
[attachment=13999:attachment]
wooley
6th April 2007, 03:41 PM
a mini spool acts just like a locker yes?

hm... would be good for my gze.

how negotiable on price are you?
Akury
6th April 2007, 03:58 PM
a mini spool acts just like a locker yes?[/b]

a mini spool acts just like a locker, but only under acceleration, kind of like a 1 way LSD, but with no slip.
Gilly
6th April 2007, 06:01 PM
it is a locker

wheels are locked both off and on acceleration there is no physical way of it locking only 1 way

spool centres are a million times better than a welded locker. stronger and as its cast and machined it doens't have the balance issues clumps of weld would generate in a welded locker.
wooley
6th April 2007, 06:39 PM
hm.... sounds sexy. lol.

ill think about it.

really gotta decide whether i want to keep my car or not.
ASC
6th April 2007, 09:02 PM
a mini spool acts just like a locker yes?

hm... would be good for my gze.

how negotiable on price are you?[/b]

make an offer, worst case scenario ill say no... http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif
ASC
10th April 2007, 08:47 PM
BUMP
ASC
20th April 2007, 03:26 PM
PRICE DROP- $650 negotiable
ASC
23rd April 2007, 12:02 PM
BUMP http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif
ASC
29th April 2007, 06:04 PM
BUMP, make an offer lads (acceptable ones of course)
ollie
29th April 2007, 08:50 PM
pm sent man
Jonny Rochester
30th April 2007, 01:32 AM
Thats not a mini spool. Thats a FULL spool, and a good thing.
dr1ft-pig
30th April 2007, 10:11 AM
how long was the center used with the 4agze??? is it noisy??? if cw&p is in good cond i may have a descent offer for you...
ASC
30th April 2007, 10:42 AM
hey yeah as said in first post used with 4agze for about 8000kms, its noisy when turning at slow speed as expected with locker, its in awsome condition as piks show... i took it apart just to show internal pics... wont seperate center from the diff housing beam thingo...
dr1ft-pig
30th April 2007, 12:07 PM
ok kool i pm'ing you now