LCA's

[DRFTR86]

I noticed that sum guys r using corona lca's to get massive camber, here's the thing, is there a certain model rona that has the lca that everyone is using or are all rona lca's the same???, cos a mate of mine has a rona witout a motor sitting in his front yard, he sed I can take the whole car aslong as I can organise it to get to the wreckers, r there and e other suspension goodies I should keep??? and by the way it's a shitty carbi model wagon and I have and 86

[Jonny Rochester]

The corona arms we talk about are XT130 and RT132, which are also exactly the same as KE30, KE55, RA23 and RA40 lower control arms I believe. Maybe the ST141 and RT142 lower control arms are the same also? not sure. Older coronas from the 70's are way different as they have upper and lower arms, not mcpherson struts.

Bits to keep or sell:
front struts from XT130 Corona
T series diff
rear end if it's 4 link, wagon is leaf
gearbox, if it's a W50
rear shocks, will fit

[RobertoX]

they don't give massive camber

1.5 degrees neg

[rthy]

thats 1.5 degrees dependant on the height of your car, I am using XT-130

it's a good choice either way

[Nikkojoe]

I'm going to get some XT130's. The ST141's I measured are too close in length to standard 86/e7 lca's. XT130's I found were about 10mm longer from center of pivot bolt to center of ball joint

[Javal]

*sighs*

LCA's Thread (http://www.ae86drivingclub.com.au/forum/index.php?showtopic=16468)

Dude. Search.

I thought school hols were over?

[keiichi]

*sighs*

LCA's Thread (http://www.ae86drivingclub.com.au/forum/index.php?showtopic=16468)

Dude. Search.

I thought school hols were over?[/b]

man youre so smart.
882 posts and all, good for you :2thumbs: give the guy a break.

[keiichi]

I would recommend against the xt130 lower arms if it's for drifting. even for grip. cause either way, if you want high grip, you want high grip tyres and they will fold too much with 1.5deg neg camber. go s13 suspension (most people say it is shit, believe them if you want). it gives you high track, camber and castor; and I don't know why but always makes a toyota handle better then a silvia.
although, for an easy begginers setup, xt130 is fine... I guess.

[keiichi]

I'm going to get some XT130's. The ST141's I measured are too close in length to standard 86/e7 lca's. XT130's I found were about 10mm longer from center of pivot bolt to center of ball joint[/b]

correct. if anything st/rt 141/142 LCAs are shorter. reason being is that when I put xt130 LCAs in mt rt142 it increased the camber a lot more then it does on every ae86 or ae71/ke70 I've ever seen.

[DRFTR86]

it's and st141, man I was lookin forward to heeps of free goodies, so is there and e thing from it at all I could use???