MYT-16V
25th December 2008, 07:57 PM
I'm looking to sell my engine package asking $4500
:crying:
174 rwkw @ 15psi aprrox. 40000kms
What you get:
* Big port GZE with distributorless CAS
* Motor was professionally rebuilt all balanced and blueprinted
* Brand new GZE pistons and rings were used
* All mains and conrod bearings were replaced (oem toyota)
* Head was also serviced (std oem head gasket)
* Injectors were also serviced
* JDM rwd inlet manifold (HPC coated), TVIS removed and replaced with custom one.
* Rwd altenator and water pump set up
* Fuel rail, cam covers, cam gears are all HPC coated
* Tuned length high mount turbo manifold (HPC coated)
* Garrett T28, perfect condition no shaft play front housing is also HPC'd
* 3" dump pipe
* large front mount cooler 2.5" inlet & 3" outlet with all pipe work also HPC'd
* Turbosmart blow off valve
* Trust AIRINX air filter
* Four individual Bosch coils + larger diameter ignition leads
* 5 puck brass button clutch with a sprung center
* EMS ecu + Handset and wiring (tuned by Unigroup Engineering)
* Also included is a complete air con set up off a JDM 86.
The engine has never been drifted or seen a track day. It drives so well and is very reliable. I am only selling because i'm going to put turbo Beams motor in it and need the funds.
Whoever buys this will not be dissapointed everything is ready to go
Engine is still in the car and can be seen running or test driven. However only serious buyers please no test pilots.
PM, SMS or call Tony 0411 767 838
:crying:
174 rwkw @ 15psi aprrox. 40000kms
What you get:
* Big port GZE with distributorless CAS
* Motor was professionally rebuilt all balanced and blueprinted
* Brand new GZE pistons and rings were used
* All mains and conrod bearings were replaced (oem toyota)
* Head was also serviced (std oem head gasket)
* Injectors were also serviced
* JDM rwd inlet manifold (HPC coated), TVIS removed and replaced with custom one.
* Rwd altenator and water pump set up
* Fuel rail, cam covers, cam gears are all HPC coated
* Tuned length high mount turbo manifold (HPC coated)
* Garrett T28, perfect condition no shaft play front housing is also HPC'd
* 3" dump pipe
* large front mount cooler 2.5" inlet & 3" outlet with all pipe work also HPC'd
* Turbosmart blow off valve
* Trust AIRINX air filter
* Four individual Bosch coils + larger diameter ignition leads
* 5 puck brass button clutch with a sprung center
* EMS ecu + Handset and wiring (tuned by Unigroup Engineering)
* Also included is a complete air con set up off a JDM 86.
The engine has never been drifted or seen a track day. It drives so well and is very reliable. I am only selling because i'm going to put turbo Beams motor in it and need the funds.
Whoever buys this will not be dissapointed everything is ready to go
Engine is still in the car and can be seen running or test driven. However only serious buyers please no test pilots.
PM, SMS or call Tony 0411 767 838