VL fuel pump..

[kaneo]

hey all,
i have converted my ae71 4a-C to a 4A-GE JDM bluetop.
I have a VL high pressure external pump ready to install... is this the only pump i need, or will i absolutely require a secondary pump? I'm unsure if the VL pump is substantial for what i need (note: i am not using swirl pot)
thanks all. all comments much appreciated.
Kane

[RObErT_RaTh]

it would be recommended to have a small lift pump, to feed to the vl pump coz they suck at sucking

im not sure on wat specs on the lift pump but im using a low pressure high volume one,

[kaneo]

ok, so if i have the VL pump near the tank, a smaller external pump with more sucking power should be installed closer to the tank? the VL pump just won't do on it's own?

[RObErT_RaTh]

ok, so if i have the VL pump near the tank, a smaller external pump with more sucking power should be installed closer to the tank? the VL pump just won't do on it's own?[/b]

it will, but fuel surge will occur more frequently, yeh best bet is get a small universal pump and chuck it in the lines, with a small carby fuel filter before it, and then the vl pump, then a bigger efi filter,

or once i saw someone get a vl intank lift pump and put that into the ke70 tank, which feeds to the external pump

[57YLN]

alreadys been explained