View Full Version : Heavy duty 4age con-rods
rthy
5th September 2007, 01:31 PM
These are orginally from a 20v silvertop so they will suit any 4age with a later model crank (42mm big end and 20mm small)
- these have had the edges carefully ground, not linished which takes heaps of material away
- crack tested and linished in a aerospace approved buisness not in a backyard mechnics workshop
- comes with 4 brand new small end bearings still in packets from Toyota as the original small end bearings copped a few stray shots.
- new un-fitted arp rod bolts
these would handle 9000 revs no problem
I am in S.E suberbs of vic but will post anywhere
will provide pics shortly
$300 ONO
us_ae86
5th September 2007, 03:13 PM
-Topic Reopened-
Another one locked out of nowhere. :rant:
rthy
5th September 2007, 09:36 PM
thanks
rthy
6th September 2007, 10:36 AM
oh also I am open to swaps with or without a cash difference, I am looking for the following:
7afe or 4afe head after 1993
16v 4agze pistons and pins
rthy
7th September 2007, 08:52 PM
heres the pics:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/148438.jpg
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/148437.jpg
and during the perperation process:
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/148380.jpg
rthy
11th September 2007, 03:46 PM
price drop to 260
rileymoore05
11th September 2007, 10:39 PM
i have a set of ae92 small port pistons and pins here. might be interested in a swap with cash your way as the pistions are used but in good order.
will most likley speak too you on msn next time i see you online.
see if we can work out something.
rthy
12th September 2007, 02:31 PM
sounds good I will be online tonight
5PRNTA
13th September 2007, 12:07 PM
pm sent dude
ae71
13th September 2007, 03:06 PM
sam will the arp rod bolts fit bigport..?
if so im intrested in those if you will seporate them.
browneye
14th September 2007, 08:55 PM
Hey Sam...
Firstly...check your pm's <_<
Send me payment details and I'll deposit on Monday..
Regards
Scott Brown
rthy
19th September 2007, 01:07 PM
ae71: the bolts themself should fit any 4age rod I would think, probaly any A series rod for that matter
scott: I have someone who got in first who I might be trading some 4agze pistons with, if that falls though I will let you know
rileymoore05
19th September 2007, 06:13 PM
thanks sam.
now you just gotta measure your bore too see of those pistions are right.
and yes, all 4age rods bolts are the same, unfortunatly 7A ones arent...
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.