View Full Version : ae86 front bar onto ae71
Fozz
9th September 2007, 08:17 PM
Hey guys i was looking at an ae71 and it had a ae86 front bar and ae86 side pannels. sort of like a sil80 conversion does anyone know how to do this and is it easy like straight bolt on or not.
cheers
Bustin_86
9th September 2007, 08:25 PM
Pics of said vehicle?
Gavin
9th September 2007, 08:33 PM
http://www.ae86drivingclub.com.au/dcimages/1/5/7/5/553356.jpg
RObErT_RaTh
9th September 2007, 08:45 PM
oh snap, thats kewl, dont think it wuld be straight bolt up, but would like to see how its done
us_ae86
9th September 2007, 08:45 PM
uuuhhhhh.... that whole front end is sprintaaaaaaaa.
Fozz
9th September 2007, 09:01 PM
soz i couldnt get pics i found it in a jap magazine but yer it looks like what gavin posted up does any1 know how its done?
rthy
9th September 2007, 09:16 PM
I think that doesnt look half bad, well except for that gaurd..
heres what I think may be involved:
- sprinter radiator support pannel or redriled ae71 one
- sprinter or ae82 headlights
- sprinter or ae82 parkers
- customised gaurds
- sprinter bumper with the edges trimmed lower to clear the lip on the ae71 gaurds or chop off the lower part of the gaurd
- bonnet ??
hachirusto
9th September 2007, 09:29 PM
the guards and the mirrors make it look gay, doesn't suit the body lines of the car at all, but it would probably look good with normal guards and mirrors
seek
9th September 2007, 09:41 PM
yeah guards are a negative, however it somehow reminds me of a SSS bluebird or whatever they are
Trev084
9th September 2007, 09:42 PM
This one looks hot:
[attachment=17314:KE70_wit...86_Front.jpg]
obey wan boenny
9th September 2007, 09:44 PM
The orange one looks absolutely revolting, red one = hot
I'd imagine some kind of fibreglass work would be needed to massage the front guards on and also some kind of custom brackets to mount the headlights and grill etc.
us_ae86
9th September 2007, 09:48 PM
I'm going to do it now. PERIOD.
Driftspec
9th September 2007, 10:56 PM
I don't think they are a bolt-on item, I'm guessing some body work mods are needing, not to mention what SamQ suggested needs to be modded.
That red one = teh hotness
johl
9th September 2007, 11:03 PM
angle grinder+zip ties...?
rthy
9th September 2007, 11:26 PM
that red one is definetly using sprinter gaurds, the part near the door needs modification to suit
I know this my friend was set on doing this and showed me that pic, its sad hes not around to do it anymore
Konakid
9th September 2007, 11:59 PM
WAK
rthy
10th September 2007, 12:10 AM
WAK?
WTF?
Konakid
10th September 2007, 12:19 AM
It looks like ass, 86's and E7's have completely different lines.... look at the car as a whole, its looks shocking.
rthy
10th September 2007, 12:32 AM
yeah I see where your coming from,
guys if you look closely you will see on the front half of the gaurd is has the original sprinter inward curved shape in the panel but at the back part they smooth it over to suit the rest of the car,
I agree that it looks out of wak like konakid says.
rthy
10th September 2007, 12:52 AM
haha put a trueno front on ke70
rthy
10th September 2007, 07:34 AM
I have seen it done to a T-18...
MountainRunner
10th September 2007, 09:06 AM
looks ugly go quads :D
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.