4AG Distributor seal?

[mini_andrew]

Hey guys,

My dizzy on my 4ag in my 70 has started to leak a bit lately. I thougt it was the o-ring where it goes into the cylinder head so i changed that, but it is still doing it. :angry:

I took the cap off and there is oil leaking inside the dizzy body.... Are shaft seals for them available from toyota?

[Monster]

Not seperatly. I'm pretty sure you have to buy the whole dizzy... unless you know someone :)

Why don't you call Toyota?

I've try to match it in an aftermarket type, a narrower version is available but the biggest difference is that it will not have a Helix on the lip (ie, the grooves which push the oil back in)

[parrot]

<a href="http://www.kbox.ca/catalog/index.php" target="_blank">http://www.kbox.ca/catalog/index.php (http://www.kbox.ca/catalog/index.php)</a>

and look under corolla (not sprinter). $24.99 USD plus postage.

[Nikkojoe]

A auto electrician will charge you $100 for a new seal to be put in (full pull down), or you can do it yourself (a guide on toymods somewhere) if you can find the seal as its not a part which toyota sell.

Much easier to buy the kit from where parrot listed though.

[parrot]

Whilst I am on a club4ag thing

http://forums.club4ag.com/zerothread?id=8286

[slide86]

if your going to pull the dizzy down, you should get a new bearing and fit that also......