PDA

View Full Version : Wire Stops



Jason
4th December 2007, 02:34 PM
Ok after getting a lot of WTF's and strange looks when I ask people if they have 'wire stops'. Im wonder if any of you guys know where to get these little things.

Wire Stops (http://www.mfgsupply.com/m/c/4-219-MB.html)

They are the screw type cable termination for cables (throttle cables ect) and I dont know where to look.

Thanks J

chapl
4th December 2007, 03:39 PM
push bike shop

Jason
4th December 2007, 04:14 PM
Tried two around my area with no luck. Well i deiced to make my own, just got back with some screws and some tube stock.

chapl
4th December 2007, 04:38 PM
go back and get them to ring a distribution called 'bmx international' and get them to order one of these
http://www.odysseybmx.com/catalog/index.ph...king&page=1 (http://www.odysseybmx.com/catalog/index.php?image=knarp.jpg&list=Braking&page=1)

Jason
4th December 2007, 05:26 PM
exerlent will do! My attempt failed, the bar was to hard to tap a small thread length ways :(

chapl
5th December 2007, 10:04 AM
no worries

you might want to use 2, just for the extra stregnth.

set ya back about $12