s13 front sus

[350hp4agte]

so im 99% sure that my wheel bearings are stuffed in my new set up put it all in sits nice, I was worried my coilovers would not be the right hight turns out there perfect anyway when i drove the car it makes a grinding noise that you can feel in the steering wheel and if i raise the car the wheel has some play (like its not done up properly but it is) i no that it all sounds like wheel bearings just wanted some opinions thats all maybe i did something wrong when installing
http://img256.imageshack.us/img256/1576/dsc00119uo3.jpg (http://imageshack.us)

ALSO IN THE PIC JUST BELLOW THE BOTTOM BRAKE PISTON IS A BIG HOLE AND A LITTLE HOLE IN A TEARDROP SHAPE CAN SOMEONE TELL ME WHAT THAT IS PLEASE?

[kaibeecee]

are you using s14 hubs or stub axles at all?

if you're using s14 hubs (have 'teeth' grooving on the hub body) the ID of the bearing is bigger than the s13 stub axle.

either that, or check your gland nut in the camber top is all tight.

[dustyae86]

<div class='quotetop'>QUOTE (kaibeecee @ Dec 18 2007, 11:22 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=454247)</div>
are you using s14 hubs or stub axles at all?

if you're using s14 hubs (have 'teeth' grooving on the hub body) the ID of the bearing is bigger than the s13 stub axle.

either that, or check your gland nut in the camber top is all tight.[/b]

just go over all your nuts etc first... and the hole is for an abs sensor... obivoulsy you don't have this:P

[350hp4agte]

so when i posted this question i sorta just got the gear in drove it then left it never really checked anything properly turns out the nut that holds the hub on was loose both sides and driverside wheels bearing was stuffed thanks guys

[350hp4agte]

so when i posted this question i sorta just got the gear in drove it then left it never really checked anything properly turns out the nut that holds the hub on was loose both sides and driverside wheels bearing was stuffed thanks guys