View Full Version : engine 4 ke
rich_86
10th January 2008, 04:41 PM
for project 1000 read members ride if u want to no wat it means but basically chasing a cheap motor to go in ke70 and gearbox to suit....prefer 4 cyl....any ideas
ke70dave
10th January 2008, 04:50 PM
before you get flamed..i shall flame you...
nah just kidding...
but seriously...
what is point of this post?
are you looking for ideas? or is it a wanted to buy section?
AsleepAtTheWheel
10th January 2008, 05:07 PM
Dude, just some general advice.
PUNCTUATION in your posts will stop them sounding (reading?) like you have Tourette's Syndrome.
Full stops and paragraphs work wonders. :2thumbs:
Clinton
10th January 2008, 05:24 PM
4k with dual throatwith go alright
Gilly
10th January 2008, 06:21 PM
stock 4k and manual box will probably cost you like $100 thus shaving 1/10th of your meager budget.
anything good will cost you at least half to 3/4 yor budget and thats just a bigger K series motor. you don't want to install anything that uses a hydraulic box as you'll lose 20% of your budget getting a pedal box and associated bits to make it work.
i'd look on rollaclub for a bigger K engine
rich_86
10th January 2008, 07:24 PM
ideas at the moment punctuation is optional....how much would a 4ac turbo cost????
Clinton
10th January 2008, 07:37 PM
a 4ac - $50-$200
pedal box -$200
engine crossmemer -$100
gearbox -$300
tailshaft -$60
theres alot more but cbs
theres your budget blown to the shit already before you even strart to think about mucking around with intercoolers, turbos and manifolds
tricky_dan
11th January 2008, 09:58 PM
you've got 426 posts and dont know what engines can go in?
Gullie
11th January 2008, 11:44 PM
^^^^^^^^^^^^^
HAHAHAHHAHA
:owned:
So true
Man im doing a 4ac conversion and its costed me almost 800 so far and still got a few more things to buy
and i got my ae-ke conversion package cheap...
get a 5k and be done with it
Im only going 4ac to go 4age in the future
Felix
12th January 2008, 12:11 AM
he owns two hachis i believe with 4age's in them
he is trying to build a ke for the total cost of $1000
read the threads properly guys before you try to be smart asses thus making urself look like dead beats.
so yeh
throw some webbers and throw in a big cam, have a talk to hilton
orido
12th January 2008, 12:25 AM
look into a 3tc swap possibly?
could always ghetto it up, but i know down here its cheaper than the a-series shit!
t motor - slab of beer-$200
ta22/t18 t50 - slab of beer-$100
clutch master - $170 new
slave - ? fark knows
ta22 engine mounts and t18 mounts - $50-$100 i guess
tailshaft - slab-$100 i guess
add a 32/36 weber - $100+
extractors - $100+
and you'd have a decent setup with more torque than a 4ac and more power than a 4k and probably 4ac depending on the condition of the 3t
also if your going to bother farking around with a 4k, dont get second hand information just read this:
http://www.rollaclub.com/faq/index.php?tit...a_tough_K_motor (http://www.rollaclub.com/faq/index.php?title=Tech:Engine/K_Series/How_to_build_a_tough_K_motor)
and become a member of rollaclub and ask questions there, just make sure you search etc first!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.