PDA

View Full Version : 4efte



rich_86
19th January 2008, 10:46 AM
chasing details of capacity and powerand any info and will it fit into 86....cheers rich

rthy
19th January 2008, 11:05 AM
heres what might be needed assiming that the E block doesnt have a RWD gearbox to suit:

- custom intake piping and intercooling
- custom bellhousing
- custom clutch
- custom water cooling lines
- An aftermarket ecu or dli converter
- custom intake manifold
- probably a custom exhuast manifold and system

other than that I think the physical packaging is all ok

meadan
19th January 2008, 05:30 PM
Theres a link on rollaclub which shows an older corolla with a rwd mounted 4efte. According to that it has a custom adapter for a T50 gearbox.

Its a 1.3L, doesnt rev too much from stock. My old starlet seemed to prefer midrange revs, as opposed to revving the crap out of a 4age.
They dont use much fuel at all, well mine didnt..

I dont know why youd want to put one in an 86, though it would be interesting to see

rich_86
20th January 2008, 12:15 PM
sounds a bit to much effort to put in a ke....thanks ppls

Jonny Rochester
20th January 2008, 02:38 PM
I know of a 4E-FTE that was put in a AE92. That is relatively strait forward I think. Not the best setup, the owner just did it because they had the motor I think.