FS: unfinished SR20de+t ke70

[Nic19]

Hey guys the time has come to start getting serious about life and buy a house. so time to sell my project.
its a white KE70 with the following

the car has had an s13 x-member bolted in ready for the sr20, so it runs s13 LCA's, brakes and racing logic coilovers from an s13, has an s13 brake master too. it has s13 powersteering set-up with lock spacers.

the rear has an r31 diff and just stock springs chopped.

the fuel system is all set-up with holley blue lift pump and 910 pressure pump and a surge tank, all fuel lines are upgraded to 8mm.

it has ae71 pedal box with clutch master.

the engine that comes with it is an s13 sr20de+t it is all set-up with the turbo. comes with an rb30 gearbox with sr20 bellhousing so the shifter comes up closer to the original spot. has a full loom and ecu.

pics upon request.

i want $3,500
pm me your offers
cheers
nic



pics or without r31 diff

[aussyboyz]

hey man were about are ya

[stahlz_ae86]

Melbourne, eastern suburbs.

[aussyboyz]

cool man what exactly has to be done to finish her off?

[Nic19]

engine has to be dropped in and wired. exhuast and tailshaft made up and then a remap. it needs an adjustable panhard too tho. and radiator mounted its a excel twin thermo one.

Yeah in melbourne Lilydale area

[aussyboyz]

cool was then engine running before it was takin out of what ever it was in? Do ya know how many Ks were on it?

[Nic19]

un sure on kms. brought it off a friend who converted his s13 to a det so i got this engine.

[aussyboyz]

ok so this ones not a det you just bought a turbo for it? Is that y in needs remaping? What turbo is it do ya know?

[Nic19]

yeh it was an na sr20de and i have had the block tapped for oil return and ran water lines from the heater hose and T piece from oil pressure sender. i have a t25g and a t28 i want to keep the t28 tho

[Nic19]

bump $3500 now, may wreck out if no interest