need help identifying things

[Matty-b]

ok well i need to get a RWC and for me to do that i need to have these things plugged in etc. I'm told they are anti pollution devises.

if anyone can tell me where these are meant to be plugged into or where they run etc. that would be great

this car is a ADM car so its had the 4age put in before i owned it.

http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/167872.jpg (http://imageshack.us)
http://img378.imageshack.us/img378/1733/fasgeaca6.jpg (http://imageshack.us)

any help would be greatly appreciated

matt.

[slide86]

1. the yellow plug is air temp sensor

2. the black plug is cold start injector

3. hose with a screw is a vacumn hose (next to yellow plug)

4. the other hose is charcoal canister line

- you need the loom with the correct plugs on it to hook up the air temp and cold start.
- the hose next to the plug should either go to the map sensor or too the fuel pressure reg......
- the other hose should go to the charcoal canister to draw fuel vapour from the tank

all these things arent required to make the car run (unless map sensor isnt pugged in)

so you can make them look like they are connected to get the RWC, but in reality they are doing f**k all

[Matty-b]

yeah well i was thinking of just making them look plugged in just to get RWC and i didnt think they were doing much as the car runs fine, cheers for that ill go check it out and see what i can figure out