Inner guard flareing

[pebbles]

hey guys
just put some different rear wheels on and my car being low it slightly scrubs the inside lip on the tyre on the LHS

so what is the easiest way to sort of fold the inner lip under without damageing paint?, i don't care about paint on the inside just don't want it to crack the outside

cheers

[ke70dave]

call me stupid...but are you talking about the front or the rear?

if your talking about the front, just pull the inner guard out

if your talking about the rear......thats a little more difficult, i don't think theres any easy way, than to un do the welds, cut and weld it back a little higher, which will mostly destroy any paint on the outside

edit: i need to read better, yeah get your guard roller out and a bit of heat gun action

[pebbles]

<div class='quotetop'>QUOTE </div>
just put some different rear wheels on and my car being low it slightly scrubs the inside lip on the tyre on the LHS[/b]
:P

i don't want to pull it out, i jsut want to fold it in so its not sticking out and is folded up against the inside of the guard

[Konakid]

Just get a guard roller and roll the lip flat....

[stefan]

and re align ur diff