PDA

View Full Version : KE70 Tacho wire



Snoozy
18th April 2008, 10:37 PM
As topic states... need to hook my tach up
done the 4a conversion and havnt botherd hooking up the tacho
need to know what colour it is behind the dash as most of the other wiring was removed from the engine bay

Cheers

Jonny Rochester
19th April 2008, 01:26 PM
Often it is white, but don't know for sure.

meadan
19th April 2008, 02:30 PM
Its on the rollaclub FAQ somewhere. I think it was black, but I'm not sure now..

DR86FT
19th April 2008, 03:10 PM
http://www.rollaclub.com/faq/index.php?tit...Tacho_Into_KE70 (http://www.rollaclub.com/faq/index.php?title=Installing_an_Aftermarket_Tacho_In to_KE70)

there ya go

ae71
19th April 2008, 04:43 PM
or just run another wire from the coil?

SLO-030
19th April 2008, 05:05 PM
Its black on all 70/71/86..

It should be near where the ORGINAL coil was in the engine bay. Even if you have cut back the wires just untape the body loom and find it.



EDIT: If you put the tacho wire to an earth it will make the tacho needle jump once