View Full Version : 20v and coil packs
Gavin
19th April 2008, 05:04 PM
i was just wanted to know how you get s15 coil packs to work on a 20v 4ag
Jonny Rochester
20th April 2008, 01:02 AM
This is a question for Anthony, but if you are using the stock 20v computer, you need a electronic box made especialy to convert a single coil/igniter signal to 2 or 4 coil signals. If you have a aftermarket computer this will not be a problem and no extra electronic box is needed. I think each coil has its own igniter. Each coil needs a constant earth and power, plus a signal.
rthy
20th April 2008, 01:06 AM
I wouldn't of thought the coils would even of been long enough to physically fit a 20V engine
Benno
20th April 2008, 03:37 AM
I've got a heap of 2AZ coils if you need any?
but Anthony(kaizan garage) has DLI converters, they will work on any internal ignited coil, or external if you're up for a little extra wiring
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.