View Full Version : RA60 Celica RACK END, for s13 or sigma job
Sprinter86
19th December 2008, 12:25 PM
Hey guys,
not using these anymore,
These rack ends are significantly longer than ae/ke items, and have much more thread. they allow you to run longer lower control arms, ie. sigma, s13 etc.
I have 2 pairs that i no longer need.
Asking $45 inc post in aus.
http://i237.photobucket.com/albums/ff30/jebus_realdeal/DSC00702.jpg
cheers lads!!
located in Lilydale, VIC.
NOTE: These will 100% fit a AE steering rack and bluebird tierod, i havent personally used these with sigma LCA, but in theory, they will work fine allowing you to keep your stock TIE ROD.
Sprinter86
21st December 2008, 11:13 AM
bumparoo
Sprinter86
22nd December 2008, 04:19 PM
Cmon guys need these gon ASAP!!! buy yourself a christmas pressie!, you know one day your gonna run a s13 front end or sigma LCA's, YOU NEED THESE!!!!
Ade_Mc
23rd December 2008, 01:39 PM
whats the diff in length compared to RA40?
Sprinter86
23rd December 2008, 01:45 PM
i just rang repco to see if these RA60 rack ends were the same part no. as the RA40, but it seems RA40's have steering box?
Ade_Mc
23rd December 2008, 01:57 PM
so you need bluebird tie ends to use these?
Sprinter86
23rd December 2008, 02:01 PM
if your doing an s13 conversion yes. if not, no.
Golberg
23rd December 2008, 02:32 PM
i just rang repco to see if these RA60 rack ends were the same part no. as the RA40, but it seems RA40's have steering box?
RA40's do use a steering box and not a rack.
Sprinter86
23rd December 2008, 07:19 PM
cheers for the confirmation on that mate!
51AMU
27th December 2008, 09:48 PM
If these are still for sale...I will take them!!!
Sprinter86
5th February 2009, 07:40 PM
still got these guys, BUMP
marvis
6th February 2009, 12:44 AM
Good price.
Sprinter86
9th February 2009, 02:03 AM
still for sale.
you know your going to upgrade to s13 front end soon, may as well start gathering the required goods!! :P
Sprinter86
3rd March 2009, 12:30 AM
buyer seems to of fallen through, back up for sale
Sprinter86
5th March 2009, 12:03 AM
bumpity
Ramcam
7th April 2009, 03:39 PM
Hi there,i thought that you have to change the tie rod ends not the rack ends for a sigma conversion,correct me if im wrong
Sprinter86
7th April 2009, 10:23 PM
you can do either mate. this way works just as well!
Sprinter86
7th April 2009, 10:24 PM
There all sold btw.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.