nos4ag
2nd June 2008, 06:59 PM
Gday Everyone, long time no speak! :)
Unfortunately, due to certain personal circumstances the time has come to sell my long overdue AE86 project. The car was intending to be a TRD N2 Replica, but family problems have come up, so it has to be sold.
Here is the list of what comes with the vehicle:
- 1983 Toyota Sprinter AE86
Engine & Trans. Details
- JDM 4AGE Smallport 100kw Block
- JDM 4AGE Bigport Cylinder Head
- TRD Metal Head Gasket
- New Seals
- New Gaskets
- All Metal Engine Brackets, Bolts & Timing Belt B/Plate CADD Plated.
- RWD Engine Mounts
- RWD Alternator
- RWD Startor Motor
- RWD Viscous Fan
- TRD Clutch
- Standard 4AGE RWD Flywheel
- JDM AE86 Gearbox & Bellhousing
- Running an AE92 4AGE ECU & Modified Wiring Loom
+ All the rest of the engine gear to get it running.
The engine will be detailed and all ancillaries put back on the engine when ready to be sold.
Body,Brakes & Suspension Details
- Paint is "Yellow"
- Very (Well Near Perfect) Straight AE86 Shell.
- Underside has been cleaned and spray sealed.
- Complete L/H/S panel is BRAND NEW.
- 3 Small 5 Cent piece size rust holes, rest of the car is excellent.
- 4 x Doors
- 4 x Rear Quarter Glass.
- 2 x Front Metal Guards.
- 2 x Front Fibreglass Guards. (Need a bit of work)
- 1 x Rear Hatch w/glass.
- 2 x ADM Fuel Tanks
- All Front & Rear Suspension has been been CADD Plated and is now
in brand new condition. All Front and Rear Suspension has also been fitted
- T Series Rear Diff centre and Housing.
- T Series 4:11 Centre.
- Rear Diff has all new seals, wheel cylinders and shoes.
- Rear KYB/Bridgestone Potenza 4 Way Ajustable Shocks.
- Rear 8kg TRD Blue Springs (Not fitted).
- All new Nolathane bushes fitted front and Rear.
- JDM Front Rotors and Calipers.
- New Front Wheel Bearings & Seals
- ADM Steering rack, w/new boots.
- KYB AGX 4 Way Adjustable Front Shocks in Standard AE86 Struts.
- New Ball Joints
The car is basically a rolling shell, and I was nearly getting it ready to take down to the panel shop to get primed, welded and sprayed.
The engine is NOT in the car at the moment.
The car also comes with 2 lots of ADM AE86 Interior, 2 steering racks & 2 steering columns.
The car is missing its front windscreen and front bumper is damaged but straight, but all other parts are there.
I will sell the car with 3 months registration, even though it is far from finished.
Enquiries on pricing can be made on 0410611465 "AFTER" 5:00pm each day,
and "NO" I will NOT be separating anything from the vehicle, as I need it all gone!
I am looking for $4600 negotiable for the lot!!
If you are interested in the vehicle, please PM me only, and only post a question if its a genuine enquiry please :)
I also have no pics of the vehicle, so please don't ask for any at the moment.
Thank You All!! :)
Regards, Ben.
Unfortunately, due to certain personal circumstances the time has come to sell my long overdue AE86 project. The car was intending to be a TRD N2 Replica, but family problems have come up, so it has to be sold.
Here is the list of what comes with the vehicle:
- 1983 Toyota Sprinter AE86
Engine & Trans. Details
- JDM 4AGE Smallport 100kw Block
- JDM 4AGE Bigport Cylinder Head
- TRD Metal Head Gasket
- New Seals
- New Gaskets
- All Metal Engine Brackets, Bolts & Timing Belt B/Plate CADD Plated.
- RWD Engine Mounts
- RWD Alternator
- RWD Startor Motor
- RWD Viscous Fan
- TRD Clutch
- Standard 4AGE RWD Flywheel
- JDM AE86 Gearbox & Bellhousing
- Running an AE92 4AGE ECU & Modified Wiring Loom
+ All the rest of the engine gear to get it running.
The engine will be detailed and all ancillaries put back on the engine when ready to be sold.
Body,Brakes & Suspension Details
- Paint is "Yellow"
- Very (Well Near Perfect) Straight AE86 Shell.
- Underside has been cleaned and spray sealed.
- Complete L/H/S panel is BRAND NEW.
- 3 Small 5 Cent piece size rust holes, rest of the car is excellent.
- 4 x Doors
- 4 x Rear Quarter Glass.
- 2 x Front Metal Guards.
- 2 x Front Fibreglass Guards. (Need a bit of work)
- 1 x Rear Hatch w/glass.
- 2 x ADM Fuel Tanks
- All Front & Rear Suspension has been been CADD Plated and is now
in brand new condition. All Front and Rear Suspension has also been fitted
- T Series Rear Diff centre and Housing.
- T Series 4:11 Centre.
- Rear Diff has all new seals, wheel cylinders and shoes.
- Rear KYB/Bridgestone Potenza 4 Way Ajustable Shocks.
- Rear 8kg TRD Blue Springs (Not fitted).
- All new Nolathane bushes fitted front and Rear.
- JDM Front Rotors and Calipers.
- New Front Wheel Bearings & Seals
- ADM Steering rack, w/new boots.
- KYB AGX 4 Way Adjustable Front Shocks in Standard AE86 Struts.
- New Ball Joints
The car is basically a rolling shell, and I was nearly getting it ready to take down to the panel shop to get primed, welded and sprayed.
The engine is NOT in the car at the moment.
The car also comes with 2 lots of ADM AE86 Interior, 2 steering racks & 2 steering columns.
The car is missing its front windscreen and front bumper is damaged but straight, but all other parts are there.
I will sell the car with 3 months registration, even though it is far from finished.
Enquiries on pricing can be made on 0410611465 "AFTER" 5:00pm each day,
and "NO" I will NOT be separating anything from the vehicle, as I need it all gone!
I am looking for $4600 negotiable for the lot!!
If you are interested in the vehicle, please PM me only, and only post a question if its a genuine enquiry please :)
I also have no pics of the vehicle, so please don't ask for any at the moment.
Thank You All!! :)
Regards, Ben.