PDA

View Full Version : Perth: AE86 PWR Custom Radiator, Custom Tailshaft



Blown86
15th June 2008, 09:24 PM
Brand new custom PWR alloy radiator for AE86, based on V8 supercar core.
- Needs small panel mods to fit
$650
SOLD

http://i231.photobucket.com/albums/ee260/Blown86_photos/IMG_0542.jpg


Custom Veem tailshaft for T50 to T series
One piece, uses Commodore unis
- As new, used for less than 5000km
$450
(this tailshaft is used with brand new JDM T series rear end with Kaaz centre and 4.778 CWP, can discuss package if a serious buyer is interested in the T series - POA)
SOLD
JDM Letterbox Grille with foglights
- grille VGC, lights as new.
SOLD



ADM T50 gearbox
- VGC, low km shifts well with cross member
$200

Prefer pickup.

More pics up tomorrow evening, can't get into the shed at the moment!! <_<

Nikkojoe
15th June 2008, 11:52 PM
Good stuff there, would be interested in radiator but can't afford it. Still got that a/c setup for me ?

Blown86
16th June 2008, 12:35 AM
<div class='quotetop'>QUOTE (Nikkojoe @ Jun 15 2008, 08:52 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=546576)</div>
Good stuff there, would be interested in radiator but can't afford it. Still got that a/c setup for me ?[/b]


yep, got the aircon for you mate.
Going a bit slow on the rebuild at the moment, short on time.
When do you want it?

Johnny_K
16th June 2008, 01:30 AM
Hey man I'm in perth too when i get paid later this week i might grab that T50 off yah, how many KMs has it roughly done ?

Blown86
16th June 2008, 02:13 AM
<div class='quotetop'>QUOTE (Johnny_K @ Jun 15 2008, 10:30 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=546607)</div>
Hey man I'm in perth too when i get paid later this week i might grab that T50 off yah, how many KMs has it roughly done ?[/b]

Approx 75,000 from memory.
Check it out and see what you think. :)

hillclimb86
16th June 2008, 10:32 AM
has the radiator been used , does it have any thing wrong with it, what pannel mods need doing and would you send to syd.

Blown86
16th June 2008, 09:22 PM
<div class='quotetop'>QUOTE (hillclimb86 @ Jun 16 2008, 07:32 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=546662)</div>
has the radiator been used , does it have any thing wrong with it, what pannel mods need doing and would you send to syd.[/b]

Brand new, never used, perfect condition.
I'm selling it because I have another exactly the same.

Needs about 10 - 15mm trimmed from the right hand side of the radiator support panel.

I can freight at your cost, doubt I can send it Aust Post, would have to be courier.

narchi
16th June 2008, 10:28 PM
t50 easy to swap with a s series gearbox???
if so might be interested gearbox tailshaft and diff if right price. pm me with price.

Blown86
17th June 2008, 12:13 AM
<div class='quotetop'>QUOTE (Narchi @ Jun 16 2008, 07:28 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=547219)</div>
t50 easy to swap with a s series gearbox???
if so might be interested gearbox tailshaft and diff if right price. pm me with price.[/b]

Don't know about the S series swap mate.

PM sent about the rest.

AEE86
17th June 2008, 12:28 PM
Interested in fogs only, care to part them out from the grille? price? PM if you wish

Thanks

Paul

Lost Prophet
17th June 2008, 02:51 PM
<div class='quotetop'>QUOTE (Narchi @ Jun 16 2008, 07:28 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=547219)</div>
t50 easy to swap with a s series gearbox???
if so might be interested gearbox tailshaft and diff if right price. pm me with price.[/b]

The t50 is the same one you have mate, you'll have to use your s series tailshaft though as the one made for a t series will be slightly too short i think (or long), either way it wont fit. Just buy the lot off him... That T series diff is probably as fresh as they came these days.

Good luck with the sale Blown, will be in contact soon about that harness

Blown86
18th June 2008, 09:55 PM
<div class='quotetop'>QUOTE (AEE86 @ Jun 17 2008, 09:28 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=547430)</div>
Interested in fogs only, care to part them out from the grille? price? PM if you wish

Thanks

Paul[/b]

I'd rather sell complete if possible...

Blown86
18th June 2008, 09:57 PM
<div class='quotetop'>QUOTE (Lost Prophet @ Jun 17 2008, 11:51 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=547489)</div>
The t50 is the same one you have mate, you'll have to use your s series tailshaft though as the one made for a t series will be slightly too short i think (or long), either way it wont fit. Just buy the lot off him... That T series diff is probably as fresh as they came these days.

Good luck with the sale Blown, will be in contact soon about that harness[/b]

Cheers LP, got the harness waiting, good for if you're :teehee:
:D

SIM355
18th June 2008, 09:59 PM
pm'd

Blown86
22nd June 2008, 02:48 AM
Grille and foggies sold pending payment.

Blown86
5th July 2008, 12:09 PM
Grille and foggies sold.

The rest still for sale.
I'll answer PMs shortly, been hectic here. :blink:

Cheers

Blown86
19th July 2008, 03:35 AM
:whistling:

Dom86
19th July 2008, 12:58 PM
<div class='quotetop'>QUOTE (Blown86 @ Jul 19 2008, 12:35 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=563355)</div>
:whistling:[/b]


check out my for sale thread. i still wanna do swaps if there is anything you need.....

http://www.ae86drivingclub.com.au/board/in...mp;#entry563435 (http://www.ae86drivingclub.com.au/board/index.php?showtopic=34449&st=0&gopid=563435&#entry563435)

I'm interested in radiator and maybe tailshaft.

Blown86
20th July 2008, 01:03 PM
<div class='quotetop'>QUOTE (dom86 @ Jul 19 2008, 09:58 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=563442)</div>
check out my for sale thread. i still wanna do swaps if there is anything you need.....

http://www.ae86drivingclub.com.au/board/in...mp;#entry563435 (http://www.ae86drivingclub.com.au/board/index.php?showtopic=34449&st=0&gopid=563435&#entry563435)

I'm interested in radiator and maybe tailshaft.[/b]


I need a Garrett BB turbo and manifold...
You still got the big rims?

Dom86
20th July 2008, 02:09 PM
just the ones in the thead ;)

Blown86
24th July 2008, 11:49 PM
Tailshaft and T series under offer.

Brand new PWR radiator and T50 still for sale. ;)

Benny
7th August 2008, 01:08 PM
Single, dual core mate?

Blown86
12th August 2008, 12:20 AM
42mm thick core.

fil
12th August 2008, 10:35 PM
<div class='quotetop'>QUOTE (Blown86 @ Jul 24 2008, 10:19 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=566339)</div>
Tailshaft and T series under offer.

Brand new PWR radiator and T50 still for sale. ;)[/b]


PM Sent...

n00bvak
13th August 2008, 10:26 AM
PM pwr radiator

Blown86
23rd August 2008, 07:08 PM
Just the T50 left at $200 :whistling:

fil
23rd August 2008, 07:16 PM
<div class='quotetop'>QUOTE (Blown86 @ Aug 23 2008, 05:38 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=578905)</div>
Just the T50 left at $200 :whistling:[/b]


Remember my offer if ya willing to post... :(