Inner diameter of 14 Wheels

[ludachris]

Hey,

I'm just asking all the kind people out there to grab a tape measure and measure the inside of the back of their 14" wheels.

What I'm REALLY after, is someone with 14" SSR meshies.

What would be EVEN BETTER, is it someone got a picutre of inside the back of the wheel.

I'm trying to figure out if i can run 14" wheels over 275mm rotors and 4spots (might have to do some grinding)

Thanks all! Your help is greatly appreciated!

Chris

[Sprinterboy]

anyone got a spare 14" rim lying around?

[ae71]

it varies from wheel to wheel mate. depends on the offset, how the spokes are designed, where abouts the tyre well of the wheels is etc.

for example, my mate couldn't fit 14x7 ma61's over his 4 spots but 14x7 starsharks cleared the callipers. also be very very careful of grinding (i assume you mean the calliper) because if you grind threw to a fluid line, that isn't good of corse. you can't really grind a wheel because you will both weaken it and put it out of balance, you maybe able to have them safely machined down a little.

it seems that 4spots fc/hilux will fit under a lot of 14" wheels. if you guess that a worse case scenario would be 12.5" (allowing for thickness of the wheel and a bit of breathing space. i don't have ssr meshies so i can't exactly measure them but a set of 14's i sold a while ago where going onto a car with hilux callipers and the inner dia was 13".

hope this helps?

[Waz]

shouldn't have much problems i reckon. what caliper?

[ludachris]

yeah i see what you mean.
The brakes are on a Datto 1600.
Mitsubishi Verada (DBA425) crossdrilled/slotted/vented 276mmx24mm rotors.
Hilux LN106 Calipers (what you guys use on XT130 struts with the Pug disc)
Distance from hub mount face to the disc is about 80mm, which is about 40mm from hub mount face to caliper.
So the overall diameter would roughly be about 315mm.

So i guess i need in internal diameter of about 12.5" at about 1.5 to 2" from the hub face.

Hahahah makes me want to try to find some 13" rims that fit :P

http://img209.auctions.yahoo.co.jp/users/7/4/9/1/kim260328-img600x450-1213426882vhbslw72280.jpg
As you can see in this pic, the smallest diameter is the diameter from the hub mount (visible weld) inwards, needs to be about 12.5"

Cheers guys