ae92 E51 gearbox swap into aw11 mr2

[spaniel]

hi all i have an E51 gearbox from a levin ae92 lying around in my garage i am currently using a c52 with my 4agze which is making 150hp atw's the c52box is starting to not handle the power, so i am looking at instaling the E51.
i would like to know if this could easly be done i have a clutch,flywheel pretty much everything is there to bolt up to the motor.
but have herd things such as the selctor shafts are placed backwards, and that you need s/c transaxles.

has anyone done this?
or no anything about the swap all info is muchly appreciated

spaniel

[Jonny Rochester]

The E50 series gearbox uses bigger axles, so you will need them also.

[tony_kim]

selector shaft is on the wrong side from memory, but it can be swapped.

i remember seeing something about it on twincam.org, if that helps.

[tony_kim]

here is the site... this explains it all...

MR2 six speed guide (http://www.20vmki.com/index1.html?section=20vswap&content=20vswap/transmission.html)

even better guide (http://www.marcmedina.com/6speed.html)