ze plugs ???

[n00bvak]

Hey Guys,

just transplanting a gze into my ke and looks like my memory was not as good as I thought it was so these plugs dont have a home. I've been trying to find a translated connector diagram from the workshop manuals but haven't gotten close

PLEASE HELP!!!

- engine : ae92 map smallport 4agze
- loom : same

Its gonna be turbo'd so i dont need supercharger stuff, which is the cut wires in pic 2 (i think) but here they are anyway

Answers from people that know please, if you have wired a gze plz help!!!

still need to know what the images with the read text are.

1. alternator confirmed
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176954.jpg

2. cut cable near fuel rail (for the charger????)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176955.jpg


3. near fuel rail (pulg for charger, but what does it do?)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176956.jpg

4. front passenger side, near pic 1 (NOT CAS)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176957.jpg

5. plug near map (idle air control valve to go on gze throttle body.)
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176958.jpg

6. reverse lights
http://www.ae86drivingclub.com.au/dcimages/4/8/4/3/176959.jpg

[Golberg]

1. Is definitely the alternator plug.
4. Looks like the CAS plug.
6. I think it may be the reverse light switch plug, tell me the color of the wires that go into it and I'll confirm.

[70XIN]

1. agreed with above, definitely alternator

4. the little grey plug is definitely CAS

Other two aren't familiar

But the ones above, i'm positive about

[Nikkojoe]

2 & 3 - dunno what the cut wire is (what colour wires are there?) but the little grey plug is for the charger)

5 is idle air control valve to go on gze throttle body.

[samuek]

not sure about the map sensor model gze but no.4 seems to be your crank angle sensor, the other plugs i done have on my car

[n00bvak]

1. OK alternator is ticked off.
2. ill confirm colours soon
3. charger something???
4. IS definatley not the CAS, thats already plugged, its also the wrong spot on the loom for it, way further down, closer to the alternaor stuff, maybe knock sensor????
5. idle air control valve
6. reverse lights, thats what i thought, need to tru and fit to t50 now :P

So still chasin what 3 and 4 are and what they control, anyone know???

[Nikkojoe]

What colour are the wires, that is the easiest way for me to tell you what the plugs are (5second cross reference on club4ag)