PDA

View Full Version : Set of rare SSR/Potenza Rims



Golberg
19th September 2008, 07:18 PM
I got these rims a while back and had no idea what they were apart from the fact that they looked good. After doing some research I found out that they were originally sold under the Potenza badge but were in fact made by SSR. They are certainly not very common rims though. Now I'm not 100% on if they are +10 offset but there is a 10 stamped on the back (amongst other things) which has no other explanation than the offset of the rim. It would by looking at them seem likely too.

By way of condition, there are a couple of chips in the paint on the centres of each of them but its not all that noticeable. 1 has no gutter rash, 2 have very minimal rash (not noticeable unless you're really up close), 1 has a bit of rash, but again it doesn't stand out all that much.

They sat quite well on my AE71 (in my opinion) and if you're keen I can put them on again and take a couple of photos.

They will come with 2 shagged 185/60's but not the the larger 195/60's which are pictured, those will be taken off before the rims are sold. I have a different pair of 195/60's both with very good tread that I'll throw in for free if the buyer wants them.

I can ship them interstate (without tyres) pm me for a quote.

Sold

And an extra $30 will get you a set of hub-centric adaptors for the rims to suit a Toyota hub. (most people don't bother with them, but its a much safer idea)

http://i260.photobucket.com/albums/ii10/Mighty_Duckster/Sale%20parts/P9190054.jpg

http://i260.photobucket.com/albums/ii10/Mighty_Duckster/Sale%20parts/P9190056.jpg

Those 2 above pics are of the wheel I've cleaned up the most (without any power tools or anything, just a bit of elbow grease), just to show how nice these come up. The others are pretty clean as it is, just the centres haven't been detailed and I haven't gone over the dish with any polish.

http://i260.photobucket.com/albums/ii10/Mighty_Duckster/Sale%20parts/P9190058.jpg

And there is the rest.

Oh and they are in Wollongong NSW.

AE71GZE
19th September 2008, 07:55 PM
any idea on width ?

Golberg
19th September 2008, 08:05 PM
<div class='quotetop'>QUOTE (AE71GZE @ Sep 19 2008, 06:55 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=590334)</div>
any idea on width ?[/b]
Sorry I should have put it in the body of the thread, they are 14 x 6 inch.

Golberg
20th September 2008, 06:38 PM
I just did a count up of what tyres I have around any of these I can have put on for a small fee:
2 x 205/60/R14 rather bald (just legal)
2 x 195/60/R14 lots of tread
4 x 185/70/R14 lots of tread but not an ADR approved tyre

And the 195's which are currently on 2 of them I'd consider letting them go with the pair but I'd want some extra $$ for them as they are brand new.