4AGE 20v Flywheel fitment

[ArubaAE86]

Hi, I was wondering in a Rear Wheel Setup like in an AE86 will any 4A engine flywheel fit a 20v engine? If not what is the part number and what are other option for flywheel setup. Thanks in advance for the help.

[FoldKing86]

Im 99% sure its only the 4agze flywheel that doesn't work, all other bigport/smallport or 20v's will work.

I believe the blacktop flywheel is the lightest factory flywheel with the silvertop second then small port and bigport being roughly the same weight.

Correct me if im wrong.

[Slimer86]

All are 8 bolt flywheel's. Gze fly won't fit in the bellhousing as it is higher with the pressure plate installed.
Ae86 and 82 are 200mm.
Ae92-ae111 are 215mm diameter clutch.
Also, install a spigot bearing from an ae71, cost about $7 from repco.

I would recommend the 215mm clutch.

[Sam-Q]

this was answered on toymods, thread closed