Coilover Question for Corona

[iTae]

CAR - Toyota Corona TT141 '84
MOTOR - 3TC
USE -Daily
PROBLEM/QUESTION - Anyone know if this particular coilover would fir the front and rear of the straight axle of the corona?

http://202.76.227.241/images/38/3829562312.jpg
And does an ea86 6kg spring fits the rear's?
http://202.76.227.241/images/29/2970727265.jpg

[Sam-Q]

those are fron nissan coilovers, err that's a no

[Konakid]

AE86 front springs fit the rear yes. But not perfectly.

[iTae]

Yea those are nissan coilover's but some corona build's here mention about s13 coilover fit's the front and those are rear ae86's spring with rear absorber's.And does anyone here have any experience with jic coilover's are they good?:jdmsmile:

[macca1590]

can convert to full s13 front end but some people say the feel is weird.
standard front end is same as ra65 and sa63/ta63 so anything that fits that will work

live axel rear? if so same as ae86/ke70 ect, so anything from them will work, if independent rear is same as ma61/ra65 so again you can use that stuff

[ecko]

dont bother with nissan shit

buy bc coilovers for Ae86 if on a budget,
or Ajps custom coilovers if you want the best

Ae86 will fit fine just make sure to get the weld on type

[iTae]

Thank's macca and yea I should search for some ae86 coilover but where I'm at coilover cost soo much.Australia money tripled it's value here and again thank you for the information guy's :DD