Haltech Guru's

[JinxD]

Hey guys does anyone know of someone thats able to come have a look at my crap

Problem ive got is that i cant get a "RPM HOME SIGNAL"
ECU is a E6K running a blacktop 20v 7AGE

any help appreciated

Cheers :)

[Twinky]

Running the stock dizzy? Optical wheel?? Have you checked the settings in the software? I'm wiring up an E6 at the moment so it's pretty similar.

[JinxD]

Got it talking had the cas wired wrong, any ideas on base map figures? We have got it to the point of almost starting it's coughing and spluttering but not quite enough to maintain idle

[Twinky]

Is the Ignition timing still in safe mode? Do you have a 02 sensor? If ignition timing is still in safe mode it will be locked to 10 deg but that should still be good for idling.
In terms of fuel maps maybe try richening up the figures till 1500rpm. Buutttttt....... I think you should maybe try the automap function to get it to idle. In the menu
there should be an option that you select an rpm that you assume will give you peak torque and it should give you a good base map to start from.

I'm no pro tuner so take my advice with a pinch of salt.

[Slimer86]

That running with you're dizzy or mine?
Seeing as you (Twinky) are down the road literally, maybe pop past?

Are the settings similar to those on the second page of this document?
Not sure (assuming) the trigger settings must be setup in the Haltech.
http://motec.com.au/filedownload.php/t11.pdf?docid=1280

[Twinky]

E6K software, wiring, manual downloads: http://www.haltech.com.au/index.php/downloads-2/previous-products

So I've had a bit of a play around with the E6K software and it does not seem to have a quickmap function. So throw the easy option out the window.
Plenty of compensation maps though! Have you got a laptop to tune it? what software version do you have?

[JinxD]

nah didnt end up using yours marko mine worked in the end.
yea ive got a computer talking to it. using software version 6.34

[Twinky]

Any luck with this yet?

[Tim.duncan]

fairly sure the coil packs are screwed,on the hunt for new ones soon

[Shrek]

This car needs more go!

[JinxD]

For those playing at home.
We got it to start after replacing the coilpacks, just trying to get the ignition settings correct.
We have ignition duration set at 3.2ms charge time and base advance at around 15 deg iirc
It's still not heaps happy to rev so we are gonna adjust it some more.
That's where we are atm :)

[Twinky]

Are you tuning by TPS or MAP?

[JinxD]

Yea by tps
Also a air temp sensor and coolant temp sensor. Still haven't got the ignition and advance correct I think

[Arch]

you got this shit running yet fool???