GeeEss
18th September 2011, 02:40 PM
As the Throttle bodies on a T3 manifold are mounted u/side down, the Linkage Mechanism & Bracket on TB's #2 & #3 are the wrong way around (for a RHD / FWD car).
I would either have to re-route throttle cable to come in from the passenger (Left Hand) side or preferably, use a custom linkage.
Can anyone advise where I can buy this hardware in Sydney or otherwise suggest another Toyota / Nissan / etc part that would do the job?
It is mainly the spring loaded pivoting linkage I am after; I should be able to fabricate the Cable retainer bracket myself.
I would either have to re-route throttle cable to come in from the passenger (Left Hand) side or preferably, use a custom linkage.
Can anyone advise where I can buy this hardware in Sydney or otherwise suggest another Toyota / Nissan / etc part that would do the job?
It is mainly the spring loaded pivoting linkage I am after; I should be able to fabricate the Cable retainer bracket myself.