View Full Version : T3 adjustable panhard rod help
Gabe
8th November 2011, 12:11 PM
Howdie yall,
Need some help installing my panhard rod into my AE71 as the bolt on the diff has what looks like a metal washer inbetween the bushed but its joined to the bolt??? if anyone has know what the dealio is there would love to know.
Cheers
H8CHIR6KU
8th November 2011, 02:13 PM
its just a stud on the diff not a bolt.
the stud has a fat shank on it which the bush goes over.
thats all part of the diff and doesnt come off. the t3 item will just slip over all that. might be a bit tight but clean up the shank as good as possible and use lube.
Gabe
8th November 2011, 03:29 PM
cheers
Jacobxxx
8th November 2011, 03:31 PM
use lube.
Timeless advice
Gabe
9th November 2011, 09:34 AM
^^^^ HAHAHA
Sam-Q
9th November 2011, 08:28 PM
to clean up the pin on the diff I suggest scrapping it first and then some sandpaper. Sometimes these get some scale on them which will cause fitment issues.
Gabe
10th November 2011, 10:24 AM
should the inner part of the bush be left on or removed? also just a quick question on spherical rod ends when i install virtually every part that had a bush with new stuff with rod ends is there going to be increased knocks and other sounds?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.