Built track car part out EOI, parts available next weekend if car not sold complete

[stahlz_ae86]

Part-out has begun...


Running AE71 CSX manual with 4A-C and original ADM box, borgy diff etc, pedders springs, stock wheels. White with blue interior, Pioneer MP3 headunit. $2500ono available for inspection in a couple weeks once I bring the stock motor home and get it going again.

4AGE Small port / red top, T3 adj. cam gears, RWD converted inlet, dizzy & leads, RWD water pump/plumbing, RWD alt bracket, alt, coil, igniter, loom to suit AE71, factory computer, T3 Alloy RWD alt, water pump and crank pulleys, $1500 - Sold pending payment Thursday 29th

Stock AE71 radiator with Thermo fan, $150

TODA lightweight flywheel, Sold - Posted

TRD Clutch Plate, $50 (has been removed and the disk has meat and comes with too)

Cast AE86 exhaust manifold with 2 into 1 stanless pipe, Sold - Picked up

2 ¼ Exhaust, stragiht through one muffler at rear to suit above manifold, Sold - Picked up

Jap T50 5 speed with near new slave, Sold - Picked up

T18 Series 2 diff housing, with new Kaaz 2-way LSD Centre, noisy 4.3 CW&P, $1000

AJPS 4.5kg/mm 245mm free height rear springs, $150

KYB 8-way adjustable Camaro rear shocks, near new, Sold - Picked up

KYB Excel G front shocks from ST185 Celica, XT130 Corona front struts shortened to suit Celica insert, HSD Coil-over kit with 6kg/mm front springs, XT130 single piston front brakes, Lucas Pads, Racing Logic Camber tops, sold as a package, Modded XT130 steering knuckles (AE86 PS length), Sold

Brand new RA60/MA61 slotted vented rotors, brand new lucas pads, New longer M12 bolts & washers, and MX62 Cressida calipers (was intending to install on above coilovers) $300

XT130 Corona lower control arms, bushes and balljoints replaced not long ago, Sold - Posted

25 row oil cooler, thermostatic sandwich plate, -10 hose and fittings (takes Z418 Filter), $300

Speco 2” oil temp, oil pressure and water temp gauge set with senders, $150. Now selling with oil cooler as a package for $400 for both as I remembered the oil temp and idiot light senders are in the sandwich plate

under car surge tank with high flow pump & lift pump, Sold - Posted

Restored 14X7 +2 Volk Fins with Toyo R888 semi's, $1000

DX Taillights, wired and ready to plug straight into Aussie E7 sedan, Sold - Picked up

Chrome front bumper with dodgey irons, comes with indicators and endcaps, $300 On hold for Daniel IOU Photo's

Chrome rear bumper (no irons for this), comes with new aftermarket endcaps, $200 On hold for Daniel IOU Photo's

Clear cam gear cover, $80 Awaiting contact for pick-up, available again.

AE71 gearbox crossmember, $50

Race seat on fixed E7 bracket, suit slim/tall driver, $200


Photo's of removed parts coming soon.


Located northern suburbs Melb. Post in here or PM to express interest in a part/s.

[john84ie]

I'll take the flywheel

[hachirusto]

1st dibs on clear cam cover if part out happens

[filfilfil]

pm sent...

[Dori_Dori]

Is that flywheel for 20v or 16

[stahlz_ae86]

16V 200mm, if the buyer of the engine package doesn't add it to their list of parts they want from the car John has first dibs on it.

All PM's replied.

Cheers,
Paul.

[willa]

Hey Paul,

Are you willing to do discounts for multiple items?

Also is the under-car surge tank one of the group buy ones? Or just generic? Willing to split it from the fuel pumps?

Cheers, Will.

[Fooly Cooly]

I am also interested in the flywheel!
Cash waiting if you want to post!

[JDMWheels]

Hi Paul,

I'd be keen on the front and rear chrome bars.

Will send you a pm now!

Dan

[stahlz_ae86]

Hey Paul,

Are you willing to do discounts for multiple items?

Also is the under-car surge tank one of the group buy ones? Or just generic? Willing to split it from the fuel pumps?

Cheers, Will.

PM me with exactly what you want, depends if there's somebody else who has already expressed interest in the same part or not. The under car surge tank is this type...
http://www.ebay.com.au/itm/undercar-ally-surge-tank-bosch-fuel-pump-bracket-race-/230748084618?pt=AU_Car_Parts_Accessories&hash=item35b9a8598a

[stahlz_ae86]

All PM's replied for tonight so far. Keep 'em coming and I'll get back to you tomorrow evening if I'm back online. With the interest so far I'll most likely pull the ebay listing and part the car out.

Cheers,
Paul.

[maxhag]

What seat is it?

[stahlz_ae86]

Fibreglass, looks like an old bride style seat which has been re-trimmed years ago. It's not a show piece, lol. Can send pic if needed.

Cheers,
Paul.

[stahlz_ae86]

Going to commence stripping the car on Saturday, some parts are spoken for already but message me if you are interested in driveline parts, as there is still a few days remaining of the car being assembled so it can be heard/seen running.

Motor will have original cam covers fitted (smallport/bigport are different) so the inner valley cover will be re-fitted. T3 cam gears are staying on the motor but plain black front cover will be fitted.

So far the flywheel, rear shocks, oil cooler setup, gauges, clear cam gear cover, gearbox crossmember, chrome bumpers and fuel system seem to be spoken for but everything else will be first come first serve.

Items can be available for pick-up Saturday arvo if my week doesn't turn to crap with work.

[*E7*]

S-BADGE please:D

[stahlz_ae86]

As far as I'm concerned you still own it, was more of a lend than a gift :P

[Dori_Dori]

Is the diff assy really noisy and at what speed is it noisy? (Any clunks)

Cheers

[ShowUsYourTints]

Hey mate,

If you're willing to post the XT130 LCAs to Sydney, i'll take them.

Will shoot you a PM.

Cheers,
Shazza

[andy86ae]

Pm sent regarding the 4age.

[stahlz_ae86]

More info on the diff...

The Kaaz centre was brand new out of the box when installed last year, both pinion shaft bearings and both carrier bearings were replaced along with the front seal. Both axles have new wheel bearings and seals too. Still meat on the drum shoes. It's in a Series 2 T-18 housing with sway mounts. The assembly of the centre was done by McDonald bro's racing in Thomastown on a second hand 4.3 gearset I supplied them. When it was assembled it was noisey under load and coasting but now it's just when coasting so the gearset seems to be wearing a new pattern to suit it's housing if that makes sense. I have recently removed the Kaaz oil and put in Penrite limslip90. Anyone seriously interested in the diff is welcome to come and visit me Wed, Thurs or Fri arvo/night this week to hear it running in car.

Shannon, XT arms I will post yes.

Andy, I have local interest in the motor already so I'll let you know if that falls through.

Gotta go to night class now so will reply other PM's later.


Cheers,
Paul.

[stahlz_ae86]

All questions answered/PM's replied I think. If I've missed you I'm sorry, PM me again and I'll be sure to answer.

[jakel]

Still interested in the fuel setup.

[stahlz_ae86]

Gearbox sold pending pick-up payment. Had another guy come test fit the Volks too but he's still deciding, so they're still available. Waiting to hear back from the guy who wants the motor. Only stuff that I have not been contacted in regards to is the front suspension/coilover setup and rear springs. Pretty sure the rest will go if the folks putting their hand up for parts come through to buy. I have a lot of PM's to send to organise distributing stuff from the car so if I haven't contacted you back it's because I'm yet to get around to it.

Who wants suspension?

Car stripping commences Saturday.


Cheers,
Paul.

[john84ie]

I still want flywheel if It's there for me Paul...

[stahlz_ae86]

Yep, it will be yours. Sat car stripping may be delayed for personal/family reasons. But everything will still go ahead as planned.

[stahlz_ae86]

PM's sent to folks picking parts up tomorrow.

Will do the bank transfer/postage related PM's soon.

[stahlz_ae86]

First post updated.

[stahlz_ae86]

Gearbox Sold

Posting goods to Jake, John and Shaz tomorrow.

Coilovers out and ready to go, pics of any unsold parts will be added Sunday if I get time in the arvo. Updating first post now.

[john84ie]

Hey Paul, would you have all the nuts and bolts needed to bolt t50 on to 4age?

[stahlz_ae86]

I'll pop a note in your parcel with a list of sizes to buy from your local bolt supplier. I need to hang onto my bolts as I'm re-installing my 4A-C and ADM T50 to sell the car as a stocker AE71 manual.

[john84ie]

That would be great, cheers mate

[DearmanKE]

Hey would you separate the small port loom? Has it been cut and modified for Rwd ?

[stahlz_ae86]

I'll see how I go with selling the motor as a complete package first. I had a rollaclub member contact me about the loom also. It is modified for rear wheel drive config, ECU mounts up under dash and loom has relays as pictured on engine bay photo's.

Sent some parcels out today, fuel setup, flywheel and LCA's all sold and posted.

[ShowUsYourTints]

Received my LCAs today, in excellent condition.

Thanks Paul.

Shazza.

[stahlz_ae86]

Good stuff, camber for you :P

Still have anything not listed as sold in first post, will be taking coilovers, wheels and some other stuff to swap meet on Sunday if anyone here is going and wants to see/buy parts.

[jakel]

Got fuel stuff today, thanks. Very well packaged.

[stahlz_ae86]

No worries :)

Oh Johnie, I forgot to measure up and put those bolt sizes in your parcel the other day. PM me Sat so I remember to measure them up and send them through. Has the flywheel arrived?


Cheers,
Paul.

[john84ie]

Got my flywheel yesterday, cheers Paul, pleasure to deal with!

I'm good for those bolt sizes now, ended up pulling running gear from my 86 for panno so have all the bolts I need now!

[john84ie]

70 posted for cam cover?

[stahlz_ae86]

Yeah why not, you have my details.

Price dropped on Coilovers, see new thread for pics.

[john84ie]

cool,what condition is it in?many scratches or marks? thanks

[stahlz_ae86]

Good condition. Haven't noticed any imperfections but I can send a photo on the weekend if you like.

[john84ie]

yeah send a pic when ya get a chance,ill take it though once its pretty clean,thanks

[stahlz_ae86]

PM'd you a photo John.

Coilovers sold.

Motor sold pending payment Thursday.

[JDMWheels]

Not in a Rush for pictures of the Chrome Front / Rear Bars :) - Still very keen though!

[stahlz_ae86]

I just got the car back on wheels yesterday and moved it backwards so it will not be so awkward to pull the bumper off now. I'll PM you later in the week.

Cheers,
Paul.

[Maciek]

Yo, ajps rear springs still available?
if so sms me asap please.
0421 971 575
thanks :)
Macca

[stahlz_ae86]

Still got them yeah.

[Maciek]

ill take them, msg or buzz me 0421 971 575
i go away for the tas round of the v8s tomo so if i dont grab them off you tonight i wont be able to till next tuesday

[phat rolla]

did engine packag end up selling? if not im very keeeeeeeeeen

[stahlz_ae86]

Yeah sold, put it on a pallet today :(

[Maciek]

Hey, are the AJPS 4.5kg/mm 245mm free height rear springs, $150
sold?
i know it was months ago but thought id ask anyway

[stahlz_ae86]

Yep springs are gone. I kept the wheels and LSD centre from this car so the only thing that didn't get snapped up in the end was the oil cooler setup and gauge set and the fixed back seat. Mods can close thread I guess as I'll probably try using the oil cooler setup in my next track car.

[Maciek]

all good, thx for th response :)

[Jacobxxx]

: )