nebuchernezzer
14th March 2012, 10:48 PM
I have for sale the following all genuine Omori parts, I'm in Newcastle area NSW.
1) Electronic 45mm Omori oil temperature gauge, i bought this new a few years ago, removed from my Silvia because I don't go to the track anymore. Excellent condition, no cut wires etc etc. SOLD
2) Mechanical 45mm Omori oil pressure gauge, as above i bought this brand new a few years ago etc etc Braided stainless steel oil pressure line. Excellent condition as well. SOLD
3) Mechanical 45mm Omori oil temperature gauge, as above i bought this new as well. The capilliary has a break in it somewhere so it doensn't work, if you can get a gauge shop to find the correct size bulb and replace/repair it there should be no issues with it. This is however up to the buyer to work out. The lighting etc etc on this gauge works perfectly. $20ono
4) Mechanical 45mm Omori water temperature gauge, as above this gauge was bought new and as above it needs the capilliary fixed. The lights etc inside it work perfectly and so on. $20ono
5) Omori 45mm triple DIN gauge mount. Mounts into any DIN pocket, takes 45mm gauges. Has additional parts like rings to adjust the angle of the gauges and so on. I bought this new a few years ago, it's in excellent condition. $50ono
6) Omori mechanical water temp sensor adaptor, mounted in an S13 SR20DET top hose, will fit others though. $20ono [EDIT] FOUND A SECOND ONE OF THESE AND AN ELECTRONIC SENDER ADAPTOR AT HOME
7) Omori oil temperature adaptors, these screw into where your sump plug goes. I have two for electronic gauges, one for Nissan and one for Toyota thread i believe. I also have two for mechanical gauges, once again one for Nissan and one for Toyota. They'll fit other sumps that use the same threads obviously. $10ea ELECTRONIC TOYTA ADAPTOR SOLD
All prices plus postage.
Pics:
Electronic oil temp, mechanical oil pressure and DIN mount
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121962.jpg
DIN mount accessories
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121965.jpg
Din rear side, showing rear of elec oil temp and mech oil temp
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121964.jpg
Sump adaptors
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121963.jpg
Mech temp gauges
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121966.jpg
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121967.jpg
Mech temp adaptor in SR top hose
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121961.jpg
1) Electronic 45mm Omori oil temperature gauge, i bought this new a few years ago, removed from my Silvia because I don't go to the track anymore. Excellent condition, no cut wires etc etc. SOLD
2) Mechanical 45mm Omori oil pressure gauge, as above i bought this brand new a few years ago etc etc Braided stainless steel oil pressure line. Excellent condition as well. SOLD
3) Mechanical 45mm Omori oil temperature gauge, as above i bought this new as well. The capilliary has a break in it somewhere so it doensn't work, if you can get a gauge shop to find the correct size bulb and replace/repair it there should be no issues with it. This is however up to the buyer to work out. The lighting etc etc on this gauge works perfectly. $20ono
4) Mechanical 45mm Omori water temperature gauge, as above this gauge was bought new and as above it needs the capilliary fixed. The lights etc inside it work perfectly and so on. $20ono
5) Omori 45mm triple DIN gauge mount. Mounts into any DIN pocket, takes 45mm gauges. Has additional parts like rings to adjust the angle of the gauges and so on. I bought this new a few years ago, it's in excellent condition. $50ono
6) Omori mechanical water temp sensor adaptor, mounted in an S13 SR20DET top hose, will fit others though. $20ono [EDIT] FOUND A SECOND ONE OF THESE AND AN ELECTRONIC SENDER ADAPTOR AT HOME
7) Omori oil temperature adaptors, these screw into where your sump plug goes. I have two for electronic gauges, one for Nissan and one for Toyota thread i believe. I also have two for mechanical gauges, once again one for Nissan and one for Toyota. They'll fit other sumps that use the same threads obviously. $10ea ELECTRONIC TOYTA ADAPTOR SOLD
All prices plus postage.
Pics:
Electronic oil temp, mechanical oil pressure and DIN mount
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121962.jpg
DIN mount accessories
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121965.jpg
Din rear side, showing rear of elec oil temp and mech oil temp
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121964.jpg
Sump adaptors
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121963.jpg
Mech temp gauges
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121966.jpg
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121967.jpg
Mech temp adaptor in SR top hose
http://img.photobucket.com/albums/v471/Nebuchernezzer/Parts/140320121961.jpg