View Full Version : GZE oversize crank pulley
adds
20th March 2012, 09:14 PM
Hey ppl I have a alloy oversize crank pulley on my gze that I dont need so I'm looking to swap for a standard gze pulley as I am going to turbo the motor.
can adjust with cash either way if need be.
Or $180 neg.
Located in Sydney
Pics in my build thread.
filfilfil
20th March 2012, 11:01 PM
What brand is it?
jdm86gtz
21st March 2012, 12:11 AM
Any 16V pulley will suit you going turbo so long as you don't have P/S or A/C so you don't need a GZE pulley.
adds
21st March 2012, 09:36 AM
Not sure on the brand it looks to be techno toy tuning. I'll check it this arvo and let u know
adds
23rd March 2012, 03:56 PM
Couldn't find and markings on it..does any one want this..
adds
26th March 2012, 07:47 PM
Bump....price drop...really after a standard 16v pulley
Nikkojoe
26th March 2012, 09:18 PM
Not that im interested, but to help anyone else out there what size is it?
165mm will make approx 10/12psi (bigport/smallport charger)
175mm will make approx 13/15psi
180mm will make approx 15/melted charger
170mm and bigger will probably require a smaller idler and possibly modification to water pump pulley
If you want a standard 16v pulley I have an unused ae82 one (test fitted only) and a few standard gze ones (used)
adds
27th March 2012, 09:28 AM
Thanks for that.. I'll measure it when I get home..
tom did u want to pass on a standard 16v pulley?
adds
27th March 2012, 06:50 PM
It's a 175mm
adds
30th March 2012, 06:16 PM
Bump
adds
30th March 2012, 10:30 PM
Sold, pending payment
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.