Major Clod
23rd July 2012, 03:28 PM
****SOLD****
I have a pair of Unfitted Autobarn Drift "Blade" reclining bucket seats. These are as new, maybe a few small marks underneath from sitting on the floor, but otherwise unused other than a test fit.
Half fit them up to the RA23 - they were a touch too high for me with a Helmet (I'm 6'2) but quite good without. Very comparable to stock really - would have kept them if I didn't need some helmet space.
- Designed for a 2 door with quick release tilt at the back.
- Surprisingly comfortable, not quite as tight as your standard Autotechica and other Autobarn specials - so if you're a slightly bigger person you won't feel like you're in a bench vice.
- ADR approved with tags - no worries for engineering
- "Unversal Mounting" - eg 4 threaded holes underneath - bottom is completely flat, so just put some 5mm pieces of flar bar in some creative positions across your existing seat rails and you're set.
- Black cloth - more durable fabric than the other Drift and Autobarn seats (which appear to be made out of a hoodlining style material - this one is more OEM)
- Hectic "DRiFT" logo in the headrest - I was going to blacken it out with a nikko, but you can leave it in if you're into that sort of thing.
$600 new RRP for the pair
Take them off my hands for $250. *****SOLD*****
Local pickup inner Brisbane unless you can organise transport.
Website images below, let me know if you want photos of the actual seats (they look the same really)
http://www.shopdrift.com/content/images/seat_blade_black_angle.jpg
http://www.shopdrift.com/content/images/seat_blade_black_front.jpg
http://www.shopdrift.com/content/images/seat_blade_black_side.jpg
http://www.shopdrift.com/content/images/seat_blade_schematic.jpg
I have a pair of Unfitted Autobarn Drift "Blade" reclining bucket seats. These are as new, maybe a few small marks underneath from sitting on the floor, but otherwise unused other than a test fit.
Half fit them up to the RA23 - they were a touch too high for me with a Helmet (I'm 6'2) but quite good without. Very comparable to stock really - would have kept them if I didn't need some helmet space.
- Designed for a 2 door with quick release tilt at the back.
- Surprisingly comfortable, not quite as tight as your standard Autotechica and other Autobarn specials - so if you're a slightly bigger person you won't feel like you're in a bench vice.
- ADR approved with tags - no worries for engineering
- "Unversal Mounting" - eg 4 threaded holes underneath - bottom is completely flat, so just put some 5mm pieces of flar bar in some creative positions across your existing seat rails and you're set.
- Black cloth - more durable fabric than the other Drift and Autobarn seats (which appear to be made out of a hoodlining style material - this one is more OEM)
- Hectic "DRiFT" logo in the headrest - I was going to blacken it out with a nikko, but you can leave it in if you're into that sort of thing.
$600 new RRP for the pair
Take them off my hands for $250. *****SOLD*****
Local pickup inner Brisbane unless you can organise transport.
Website images below, let me know if you want photos of the actual seats (they look the same really)
http://www.shopdrift.com/content/images/seat_blade_black_angle.jpg
http://www.shopdrift.com/content/images/seat_blade_black_front.jpg
http://www.shopdrift.com/content/images/seat_blade_black_side.jpg
http://www.shopdrift.com/content/images/seat_blade_schematic.jpg