Disc brake rear end & S series ae86 diff

[drift kid]

1.S series ae86 diff, drum to drum, all brake lines, both handbrake cables, even the rear half of the tailshaft, welded centre by me.
$100 (bearings all replaced recently too)

2.disc brake rear setup from a gt corona import (rare) mounts will bolt to S/T series, comes with:
2xmounting brackets
2xcalipers
2xdiscs
3x pads (missing one sorry)
4x brake shoes
this setup is really good because of the drum style hand brake inside the rotor (like commodore) aswell as the disc with decent size caliper.
$170 ono

located in hawkesbury NSW but can organise freight. your expense.

[FoldKing86]

1.S series ae86 diff, drum to drum, all brake lines, both handbrake cables, even the rear half of the tailshaft, welded centre by me.
$100 (bearings all replaced recently too)

2.disc brake rear setup from a gt corona import (rare) mounts will bolt to S/T series, comes with:
2xmounting brackets
2xcalipers
2xdiscs
3x pads (missing one sorry)
4x brake shoes
this setup is really good because of the drum style hand brake inside the rotor (like commodore) aswell as the disc with decent size caliper.
$170 ono

located in hawkesbury NSW but can organise freight. your expense.


Show me this disk brake diff you speak of!

[Faceplant456]

Show me this disk brake diff you speak of!

its only a disk brake setup, it puts those rotors and calipers onto a t or S series he said to me.

[smash]

with the disk brakes,
do they also come with the bearing retaining plate, and the backing plate/dustcover?

[drift kid]

um the bearing backing plate should be on the axle. the diff no? and no dust covers though, but who wants them anyways? i can get some pics up tomorrow if you'd like?

[Ade_Mc]

so is this a bolt on ready to use package?
im guessing you would need a prop valve?

[smash]

Yeah can you get the pics. yeah to do a disk brake conversion i thinkk is needed a bearing retainer ar least.

[drift kid]

as said before the bearing retainer should be on the axle that is being used.. and this is a bolt on arrangement, probably just need to mod your handbrake lines to suit and get an extra pad cause one is amissing

[drift kid]

heres the disc setup :)
http://i312.photobucket.com/albums/ll326/ae86drifterkid/20121022_175002.jpg
http://i312.photobucket.com/albums/ll326/ae86drifterkid/20121022_175028.jpg

[smash]

yeah i know there on the axle. there is a whole thread about it on the st141 conversions.
im keen, can you pls pm your number.
cheers

[FoldKing86]

yeah i know there on the axle. there is a whole thread about it on the st141 conversions.
im keen, can you pls pm your number.
cheers


From memory if the t-s series backing plate is used then a spacer ring is needed.

People asked about the bearing plate because the st142 stuff suits it, but t and s series is slightly different, still fits but needs spacer ring to fit as per st142 would.

If smash doesn't want the items through me your number in a pm and ill likely take these of your hands.

[drift kid]

ill let you know if smash doesn't, he has first dibs