ae86 4ac electronic ignition

[DR86FT]

anyone else put an electronic dizzy in a 4ac and have the tacho stop working?
dont think it would need a tacho booster. also when u connect the tacho wire to the neg terminal of the coil it doesnt want to start untill you stop cranking.

just thought id ask here before i went outside in the heat lol

cheers Kaan

[dove grey 64]

Nope, I put a electronic dizzy in my 4ac and didn't have that issue, search on google for fitting elec dizzy to 4ac and on one of the forums someone made a clear diagram even I could work out so follow that and you'll be right

[dove grey 64]

Also you'll need the coil that came from the ae 82 or similar, don't think you can use the 4ac coil

[Hen may possibly be a nut]

Sounds like you may have connected something wrong. The stock ballast resistor is bypassed when cranking, so maybe something funny there is causing your no start during cranking.

[DR86FT]

I'm using the coil off the ae82 , ign to +
And trigger off the electronic dizzy to - and ign to the ign module . Ill have a play later with it.