johl
10th December 2012, 04:41 PM
I am parting out my 86 i have been building since 08. first i am selling the shell and engine once that is gone i will put up a new thread with everything else.
located near ipswich QLD
pm me on here or just reply to thread and i will send you my phone number
shell sold
tomei stroked ca18 (2litre)
CA18DET bored and stroked to 2L using Tomei Stroker kit (pistons, crankshaft, tomei piston rings)
Re-Bored and Milled block
Bored oil drain backs
Resized conrods
Linished crankshaft
MLS metal Head gasket
Rebuilt and match ported head
ARP conrod, head and flywheel bolts
Gates race timing belt
New water pump
Race bearings
Port matched inlet manifold with butterflies removed and SR20DE throttle
S4 RX7 injectors (550cc)
Nismo fuel pressure regulator
HKS oil cooler kit
Greddy FMIC with stainless piping
Splitfire coilpacks
HKS 264 degree 8.5mm lift cams
Extended and baffled sump
Adaptronic ECU and new engine loom
npc 5 puck button clutch
since i bought the engine from my mate who had it in a red s13 which alot of people knew, i put a brand new core in the t517z turbo which cost $950.
engine has been tuned to 270hp on an adaptronic and the engine wiring is custom.
done less than 10 000km
http://i176.photobucket.com/albums/w178/johlmansfield/2012-02-02231436.jpg
http://www.ae86drivingclub.com.au/dcimages/7/3/406403.jpg
PRICES-
SHELL- sold
ENGINE, GEARBOX, EVERYTHING $5000
***prices are negotiable but i will not talk money over pm or text message unless you are interstate and i think you are a genuine buyer. i am happy to include other things from the car if you are purchasing the engine or shell and i'l look after you with prices. ***
build thread- http://www.ae86drivingclub.com.au/forums/showthread.php/50-Aae86
located near ipswich QLD
pm me on here or just reply to thread and i will send you my phone number
shell sold
tomei stroked ca18 (2litre)
CA18DET bored and stroked to 2L using Tomei Stroker kit (pistons, crankshaft, tomei piston rings)
Re-Bored and Milled block
Bored oil drain backs
Resized conrods
Linished crankshaft
MLS metal Head gasket
Rebuilt and match ported head
ARP conrod, head and flywheel bolts
Gates race timing belt
New water pump
Race bearings
Port matched inlet manifold with butterflies removed and SR20DE throttle
S4 RX7 injectors (550cc)
Nismo fuel pressure regulator
HKS oil cooler kit
Greddy FMIC with stainless piping
Splitfire coilpacks
HKS 264 degree 8.5mm lift cams
Extended and baffled sump
Adaptronic ECU and new engine loom
npc 5 puck button clutch
since i bought the engine from my mate who had it in a red s13 which alot of people knew, i put a brand new core in the t517z turbo which cost $950.
engine has been tuned to 270hp on an adaptronic and the engine wiring is custom.
done less than 10 000km
http://i176.photobucket.com/albums/w178/johlmansfield/2012-02-02231436.jpg
http://www.ae86drivingclub.com.au/dcimages/7/3/406403.jpg
PRICES-
SHELL- sold
ENGINE, GEARBOX, EVERYTHING $5000
***prices are negotiable but i will not talk money over pm or text message unless you are interstate and i think you are a genuine buyer. i am happy to include other things from the car if you are purchasing the engine or shell and i'l look after you with prices. ***
build thread- http://www.ae86drivingclub.com.au/forums/showthread.php/50-Aae86