My ls1 (eek) ae71.

[Deeken]

http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522593.jpg


Hey guys, thought I should start a build thread, never made one for any of my cars..


So I have an ae71 that started off as a stocker about 2 years ago.. bought it with hopes of building it into a drift car.. upgraded the suspension, put some new bushes etc in it, 2 fixed backs and a steering wheel, ended up wearing out the old 4ac as I learnt how to skid well into 3rd-4th gear (wet weather warrior) and finally decided I was cool enough to build a 4age to swap in.

I was scared of all the wiring so decided on going carbies which was just more hassle with ignition, tuning etc.. Anyway, I ended up building a forged bigport 16v with 40mm DHLA dellortos, needless to say it sounded monster and went well (never properly), but I ended up getting defected for dumb shit like my filter socks and rust in my tailgate..

Also, having like 14 demerits or something on my green P's, held off paying my fines until I have my full license, and kept the corolla off the road to keep my license, I decided to build it into a track car for real. I started with selling the 4age (which I ripped myself off with.. sold the whole setup for a mere $2000) and was tossing up between an sr20 or a 1uz swap.. This story begins with me buying a stat written off vy sv8 manual..

So far I have the corolla stripped bare pretty much.. no carpet, sound deadening, dash, interior, roof lining, anything. Only my steering column and pedals.

Yesterday I started stripping my old engine mounts off my 4a crossmember, and grinding it clean, but there is so many different options and way to try to fit the ls1 into the little corolla that I am stuck at a crossroads.

This is just a start I will have to work on more info as I think of it..

As for questions, just wondering who has any pictures of mounting, modification to parts like firewalls, crossmembers, steering rack, headers, starter motor? These can all help me at the moment as I am scared to start modifying my firewall and would perhaps like an easier option..


Thanks guys.

First start up with the 4age in it..

http://s30.beta.photobucket.com/user/xXDeekenXx/media/Ae71%20Corolla/IMG_0146_zps347dce79.mp4.html

Little tuning of the carbies.. never got it right.

http://s30.beta.photobucket.com/user/xXDeekenXx/media/Ae71%20Corolla/IMG_0293_zps2527feb6.mp4.html <- throttle blips from trumpets

http://s30.beta.photobucket.com/user/xXDeekenXx/media/Ae71%20Corolla/IMG_0319_zps9e8a0ebf.mp4.html <- exhaust note and my finishing sound.. followed by snort



COMPLETE BUILD PIC ALBUM & COUPLE OF VIDS ON MY FACEBOOK~

https://www.facebook.com/deeken.linfield/media_set?set=a.10202229604364143.1073741826.13110 38079&type=3

Couple of vids that are up on facebook now;
https://www.facebook.com/photo.php?v=10202229097271466&set=vb.1311038079&type=2&theater
https://www.facebook.com/photo.php?v=3599132073967&set=vb.1743504756&type=2&theater
https://www.facebook.com/photo.php?v=10202188939947558&set=vb.1311038079&type=2&theater
https://www.facebook.com/photo.php?v=611082202267603&set=vb.100000974875100&type=2&theater


http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522594.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522595.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522596.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522597.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522598.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522599.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522600.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522601.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522602.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522603.jpg
http://www.ae86drivingclub.com.au/dcimages/7/4/8/1/522604.jpg

[Jacobxxx]

KEEN FOR PICTURES

[Sprinter Freak]

check out D1 Daveys Facebook page - http://www.facebook.com/D1DaveyClarke?fref=ts , he just finished an ls1 conversion into his ke70.

[corey70]

i was gonna suggest d1 daveys fb page, beat me too it ^^

[gg004]

LS1 in a AE71, good combo. sounds like alotta work to fit though. good luck with your conversion

[Deeken]

Hey guys,
I will add some pictures I have laying around on my phone..
Yeah.. I already found davey's blog and have been messaging him about his sump setup, ecu setup etc, basically bombarding him with questions.

Edit: need to fix your image uploader shit, cannot upload pics to the thread, same with my for sale thread, even like 100kb pics.

[stixy]

awesome work dude, looking forward to seeing this in action.

[DR86FT]

I want see this conversion , should be good

[kid redonkulous]

Very nice mate

[Casey-G]

Sick combo mate, I have a friend who's done the same conversion and it is a weapon.. can't wait to see some vids

[R&D Mechanical]

Looking good! All the questions are easy once you have done it haha Me and the wife worked many hours doing the conversion but its well worth it! So so fun, pick any gear and you are away! I went into 4th accidentally instead of 2nd and it still went just lots of smoke haha


http://www.youtube.com/watch?v=XCQYxKOR7l4

[Matt]

use photobucket.com and link them that way... The image uploader is crap and on the list of what to fix...

[Deeken]

Looking good! All the questions are easy once you have done it haha Me and the wife worked many hours doing the conversion but its well worth it! So so fun, pick any gear and you are away! I went into 4th accidentally instead of 2nd and it still went just lots of smoke haha


http://www.youtube.com/watch?v=XCQYxKOR7l4

Hey Dave just wondering if you needed to modify anything for clearance for your manifolds? I kinda just dummy fitted the standard sv8 manifold on the drivers side and was touching the rail :(

[maxhag]

This would be so fun.
Looking forward to the updates....

[R&D Mechanical]

Had to mod rails and add thicker plate to where we notched.

[JDMWheels]

Had to mod rails and add thicker plate to where we notched.

Poor Deeken! :(

[Deeken]

Poor Deeken! :(
Haha, should be fairly easy to achieve.. Seen pics of how it's been done already..

@Davey: Did you notch far into the rail?

also, couldn't you find aftermarket headers to fit?

[R&D Mechanical]

Customer headers are 2g at the cheapest. There are a few in eBay but didn't want to risk just in case they didn't fit. Lots of rail cutting lol

[Deeken]

Well shiiiiiiiiiiiiiit. Update guys, car is finished.. I might go through my list of build photos, and just line them all up, explaining each photo I guess..

Jeez, will have to do it some time soon, 2am already, took like an hour stuffing around just to get my Xperia z to connect to the computer to upload my pics to photobucket #firstworldproblems.


Anyway, watch out for the whole library of pics I've accumulated over the build.. been a few highs and lows never thought it could do that to me. oh well.

[Matt]

Looking forward to pics of the build.

[R&D Mechanical]

Will be good to see your build pictures deee!

[Deeken]

Alright, I linked my facebook album, it has virtually the whole build album in it, all the stuff I modified and made for the car..