driftnick13
1st February 2013, 01:28 AM
car is defected and not running atm, might sell the shell or engine/gearbox/loom separate but would rather sell as a whole
ran great last time and made 180kw on 14psi with a HKS GTSS, GTR injectors, Z32 AFM and Power FC, made 160kw on 12psi with T25G and stock computer, injectors, AFM before that.
only selling due to defect and wanting a street car
all that is needed to run is turbo, intercooler and rad hoses (took off to use on new car), will be putting engine back to stock minus turbo
Interior:
Bride Brix reclinable
Suspension:
K-sport front coilovers with cusco camber tops, height and damper adjustable
slip on extra lock spacers
Tein rear coilovers height adjustable
Uras Handbrake assistors (handbrake is very easy to lock with these)
ISC solid rear subframe bushes
front and rear strut braces
Engine/Driveline:
CA18DET
oil catch can
shimmed 4.1 diff
5 bolt half shafts
Xtreme clutch HD Clutch, near new clutch plate
unknown aftermarket fuel pump
Exterior:
white paint, its rough as it was done cheap and it was a drift car
full ogirin kit with wide rear guards
front bar has slight damage
rear by is held together by cable ties but still fits good
$2000ono with stock computer, AFM, injectors
does not come with wheels, will be putting stock rims
pics can be found in this link (can't upload them here for some reason)
http://www.gumtree.com.au/m-my-ad.html?adId=1013402116
contact number is 0411160974
ran great last time and made 180kw on 14psi with a HKS GTSS, GTR injectors, Z32 AFM and Power FC, made 160kw on 12psi with T25G and stock computer, injectors, AFM before that.
only selling due to defect and wanting a street car
all that is needed to run is turbo, intercooler and rad hoses (took off to use on new car), will be putting engine back to stock minus turbo
Interior:
Bride Brix reclinable
Suspension:
K-sport front coilovers with cusco camber tops, height and damper adjustable
slip on extra lock spacers
Tein rear coilovers height adjustable
Uras Handbrake assistors (handbrake is very easy to lock with these)
ISC solid rear subframe bushes
front and rear strut braces
Engine/Driveline:
CA18DET
oil catch can
shimmed 4.1 diff
5 bolt half shafts
Xtreme clutch HD Clutch, near new clutch plate
unknown aftermarket fuel pump
Exterior:
white paint, its rough as it was done cheap and it was a drift car
full ogirin kit with wide rear guards
front bar has slight damage
rear by is held together by cable ties but still fits good
$2000ono with stock computer, AFM, injectors
does not come with wheels, will be putting stock rims
pics can be found in this link (can't upload them here for some reason)
http://www.gumtree.com.au/m-my-ad.html?adId=1013402116
contact number is 0411160974